2 # Copyright 2016 Telefónica Investigación y Desarrollo S.A.U.
4 # Licensed under the Apache License, Version 2.0 (the "License");
5 # you may not use this file except in compliance with the License.
6 # You may obtain a copy of the License at
8 # http://www.apache.org/licenses/LICENSE-2.0
10 # Unless required by applicable law or agreed to in writing, software
11 # distributed under the License is distributed on an "AS IS" BASIS,
12 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
13 # See the License for the specific language governing permissions and
14 # limitations under the License.
17 echo -e "usage: $0 [OPTIONS]"
18 echo -e "Install OSM from source code"
20 echo -e " --uninstall: uninstall OSM: remove the containers and delete NAT rules"
21 echo -e " -b <branch>: install OSM from source code using a specific branch (master, v1.0, ...)"
25 echo -e " --develop: (deprecated, use '-b master') install OSM from source code using the master branch"
26 echo -e " --nat: install only NAT rules"
27 echo -e " --update: update to the latest stable release or to the latest commit if using a specific branch"
28 echo -e " --showopts: show current options"
29 echo -e " -h / --help: print this help"
32 #Uninstall OSM: remove containers
34 if [ $RC_CLONE ] ||
[ -n "$TEST_INSTALLER" ]; then
35 $OSM_DEVOPS/jenkins
/host
/clean_container RO
36 $OSM_DEVOPS/jenkins
/host
/clean_container VCA
37 $OSM_DEVOPS/jenkins
/host
/clean_container SO
38 #$OSM_DEVOPS/jenkins/host/clean_container UI
40 lxc stop RO
&& lxc delete RO
41 lxc stop VCA
&& lxc delete VCA
42 lxc stop SO-ub
&& lxc delete SO-ub
46 #Configure NAT rules, based on the current IP addresses of containers
48 echo -e "\nChecking required packages: iptables-persistent"
49 dpkg
-l iptables-persistent
&>/dev
/null ||
! echo -e " Not installed.\nInstalling iptables-persistent requires root privileges" || \
50 sudo DEBIAN_FRONTEND
=noninteractive apt-get
-yq install iptables-persistent
51 echo -e "\nConfiguring NAT rules"
52 echo -e " Required root privileges"
53 sudo
$OSM_DEVOPS/installers
/nat_osm
56 #Update RO, SO and UI:
58 echo -e "\nUpdating components"
60 echo -e " Updating RO"
63 INSTALL_FOLDER
="/opt/openmano"
64 echo -e " Fetching the repo"
65 lxc
exec $CONTAINER -- git
-C $INSTALL_FOLDER fetch
--all
67 BRANCH
=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER status -sb | head -n1 | sed -n 's/^## \(.*\).*/\1/p'|awk '{print $1}' |sed 's/\(.*\)\.\.\..*/\1/'`
68 [ -z "$BRANCH" ] && echo " Could not find the current branch in use in the $MDG" && exit 1
69 CURRENT
=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER status |head -n1`
70 CURRENT_COMMIT_ID
=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-parse HEAD`
71 echo " FROM: $CURRENT ($CURRENT_COMMIT_ID)"
72 # COMMIT_ID either was previously set with -b option, or is an empty string
73 CHECKOUT_ID
=$COMMIT_ID
74 [ -z "$CHECKOUT_ID" ] && [ "$BRANCH" == "HEAD" ] && CHECKOUT_ID
="tags/$LATEST_STABLE_DEVOPS"
75 [ -z "$CHECKOUT_ID" ] && [ "$BRANCH" != "HEAD" ] && CHECKOUT_ID
="$BRANCH"
76 if [[ $CHECKOUT_ID == "tags/"* ]]; then
77 REMOTE_COMMIT_ID
=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-list -n 1 $CHECKOUT_ID`
79 REMOTE_COMMIT_ID
=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-parse origin/$CHECKOUT_ID`
81 echo " TO: $CHECKOUT_ID ($REMOTE_COMMIT_ID)"
82 if [ "$CURRENT_COMMIT_ID" == "$REMOTE_COMMIT_ID" ]; then
83 echo " Nothing to be done."
85 echo " Update required."
86 lxc
exec $CONTAINER -- service openmano stop
87 lxc
exec $CONTAINER -- git
-C /opt
/openmano stash
88 lxc
exec $CONTAINER -- git
-C /opt
/openmano pull
--rebase
89 lxc
exec $CONTAINER -- git
-C /opt
/openmano checkout
$CHECKOUT_ID
90 lxc
exec $CONTAINER -- git
-C /opt
/openmano stash pop
91 lxc
exec $CONTAINER -- /opt
/openmano
/database_utils
/migrate_mano_db.sh
92 lxc
exec $CONTAINER -- service openmano start
96 echo -e " Updating SO and UI"
99 INSTALL_FOLDER
="" # To be filled in
100 echo -e " Fetching the repo"
101 lxc
exec $CONTAINER -- git
-C $INSTALL_FOLDER fetch
--all
103 BRANCH
=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER status -sb | head -n1 | sed -n 's/^## \(.*\).*/\1/p'|awk '{print $1}' |sed 's/\(.*\)\.\.\..*/\1/'`
104 [ -z "$BRANCH" ] && echo " Could not find the current branch in use in the $MDG" && exit 1
105 CURRENT
=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER status |head -n1`
106 CURRENT_COMMIT_ID
=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-parse HEAD`
107 echo " FROM: $CURRENT ($CURRENT_COMMIT_ID)"
108 # COMMIT_ID either was previously set with -b option, or is an empty string
109 CHECKOUT_ID
=$COMMIT_ID
110 [ -z "$CHECKOUT_ID" ] && [ "$BRANCH" == "HEAD" ] && CHECKOUT_ID
="tags/$LATEST_STABLE_DEVOPS"
111 [ -z "$CHECKOUT_ID" ] && [ "$BRANCH" != "HEAD" ] && CHECKOUT_ID
="$BRANCH"
112 if [[ $CHECKOUT_ID == "tags/"* ]]; then
113 REMOTE_COMMIT_ID
=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-list -n 1 $CHECKOUT_ID`
115 REMOTE_COMMIT_ID
=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-parse origin/$CHECKOUT_ID`
117 echo " TO: $CHECKOUT_ID ($REMOTE_COMMIT_ID)"
118 if [ "$CURRENT_COMMIT_ID" == "$REMOTE_COMMIT_ID" ]; then
119 echo " Nothing to be done."
121 echo " Update required."
122 # Instructions to be added
123 # lxc exec SO-ub -- ...
128 #Configure VCA, SO and RO with the initial configuration:
129 # RO -> tenant:osm, logs to be sent to SO
130 # VCA -> juju-password
131 # SO -> route to Juju Controller, add RO account, add VCA account
132 function configure
(){
133 #Configure components
134 echo -e "\nConfiguring components"
135 .
$OSM_DEVOPS/installers
/export_ips
137 echo -e " Configuring RO"
138 lxc
exec RO
-- sed -i -e "s/^\#\?log_socket_host:.*/log_socket_host: $SO_CONTAINER_IP/g" /opt
/openmano
/openmanod.cfg
139 lxc
exec RO
-- service openmano restart
140 time=0; step
=2; timelength
=20; while [ $time -le $timelength ]; do sleep $step; echo -n "."; time=$
((time+step
)); done; echo
141 lxc
exec RO
-- openmano tenant-delete
-f osm
>/dev
/null
142 RO_TENANT_ID
=`lxc exec RO -- openmano tenant-create osm |awk '{print $1}'`
144 echo -e " Configuring VCA"
145 JUJU_PASSWD
=`date +%s | sha256sum | base64 | head -c 32`
146 echo -e "$JUJU_PASSWD\n$JUJU_PASSWD" | lxc
exec VCA
-- juju change-user-password
147 JUJU_CONTROLLER_IP
=`lxc exec VCA -- lxc list -c 4 |grep eth0 |awk '{print $2}'`
149 echo -e " Configuring SO"
150 sudo route add
-host $JUJU_CONTROLLER_IP gw
$VCA_CONTAINER_IP
151 lxc
exec SO-ub
-- nohup sudo
-b -H /usr
/rift
/rift-shell
-r -i /usr
/rift
-a /usr
/rift
/.artifacts
-- .
/demos
/launchpad.py
--use-xml-mode &
152 time=0; step
=30; timelength
=300; while [ $time -le $timelength ]; do sleep $step; echo -n "."; time=$
((time+step
)); done; echo
154 curl
-k --request POST \
155 --url https
://$SO_CONTAINER_IP:8008/api
/config
/config-agent \
156 --header 'accept: application/vnd.yang.data+json' \
157 --header 'authorization: Basic YWRtaW46YWRtaW4=' \
158 --header 'cache-control: no-cache' \
159 --header 'content-type: application/vnd.yang.data+json' \
160 --data '{"account": [ { "name": "osmjuju", "account-type": "juju", "juju": { "ip-address": "'$JUJU_CONTROLLER_IP'", "port": "17070", "user": "admin", "secret": "'$JUJU_PASSWD'" } } ]}'
162 curl
-k --request PUT \
163 --url https
://$SO_CONTAINER_IP:8008/api
/config
/resource-orchestrator \
164 --header 'accept: application/vnd.yang.data+json' \
165 --header 'authorization: Basic YWRtaW46YWRtaW4=' \
166 --header 'cache-control: no-cache' \
167 --header 'content-type: application/vnd.yang.data+json' \
168 --data '{ "openmano": { "host": "'$RO_CONTAINER_IP'", "port": "9090", "tenant-id": "'$RO_TENANT_ID'" }, "name": "osmopenmano", "account-type": "openmano" }'
172 function install_lxd
() {
175 systemctl stop lxd-bridge
176 systemctl
--system daemon-reload
177 systemctl
enable lxd-bridge
178 systemctl start lxd-bridge
192 while getopts ":h-:b:" o
; do
201 [ "${OPTARG}" == "help" ] && usage
&& exit 0
202 [ "${OPTARG}" == "develop" ] && DEVELOP
="y" && continue
203 [ "${OPTARG}" == "uninstall" ] && UNINSTALL
="y" && continue
204 [ "${OPTARG}" == "nat" ] && NAT
="y" && continue
205 [ "${OPTARG}" == "update" ] && UPDATE
="y" && continue
206 [ "${OPTARG}" == "reconfigure" ] && RECONFIGURE
="y" && continue
207 [ "${OPTARG}" == "test" ] && TEST_INSTALLER
="y" && continue
208 [ "${OPTARG}" == "lxd" ] && LXD
="y" && continue
209 [ "${OPTARG}" == "showopts" ] && SHOWOPTS
="y" && continue
210 echo -e "Invalid option: '--$OPTARG'\n" >&2
214 echo -e "Invalid option: '-$OPTARG'\n" >&2
223 [ -z "$COMMIT_ID" ] && [ -n "$DEVELOP" ] && COMMIT_ID
="master"
224 [ -n "$TEST_INSTALLER" ] && [ -z "$COMMIT_ID" ] && echo "Use -b option to specify the branch to use for the test (e.g.: v1.0)" && exit 0
226 if [ -n "$TEST_INSTALLER" ]; then
227 echo -e "\nUsing local devops repo for OSM installation"
228 TEMPDIR
="$(dirname $(realpath $(dirname $0)))"
230 echo -e "\nCreating temporary dir for OSM installation"
231 TEMPDIR
="$(mktemp -d -q --tmpdir "installosm.XXXXXX
")"
232 trap 'rm -rf "$TEMPDIR"' EXIT
235 echo -e "Checking required packages: git"
236 dpkg
-l git
&>/dev
/null ||
! echo -e " git not installed.\nInstalling git requires root privileges" || sudo apt
install -y git
237 if [ -z "$TEST_INSTALLER" ]; then
238 echo -e "\nCloning devops repo temporarily"
239 git clone https
://osm.etsi.org
/gerrit
/osm
/devops.git
$TEMPDIR
243 echo -e "\nGuessing the current stable release"
244 LATEST_STABLE_DEVOPS
=`git -C $TEMPDIR tag -l v[0-9].* | tail -n1`
245 [ -z "$COMMIT_ID" ] && [ -z "$LATEST_STABLE_DEVOPS" ] && echo "Could not find the current latest stable release" && exit 0
247 if [ -n "$SHOWOPTS" ]; then
248 echo "DEVELOP=$DEVELOP"
249 echo "UNINSTALL=$UNINSTALL"
251 echo "UPDATE=$UPDATE"
252 echo "RECONFIGURE=$RECONFIGURE"
253 echo "TEST_INSTALLER=$TEST_INSTALLER"
255 echo "SHOWOPTS=$SHOWOPTS"
256 echo "Latest tag in devops repo: $LATEST_STABLE_DEVOPS"
257 echo "Commit to be installed (-b): $COMMIT_ID"
262 OSM_JENKINS
="$TEMPDIR/jenkins"
263 .
$OSM_JENKINS/common
/all_funcs
265 [ -n "$UNINSTALL" ] && uninstall
&& echo -e "\nDONE" && exit 0
266 [ -n "$NAT" ] && nat
&& echo -e "\nDONE" && exit 0
267 [ -n "$UPDATE" ] && update
&& echo -e "\nDONE" && exit 0
268 [ -n "$RECONFIGURE" ] && configure
&& echo -e "\nDONE" && exit 0
270 #Installation starts here
271 [ -z "$COMMIT_ID" ] && [ -n "$LATEST_STABLE_DEVOPS" ] && COMMIT_ID
="tags/$LATEST_STABLE_DEVOPS"
272 echo -e "\n Installing OSM from refspec: $COMMIT_ID"
274 wget
-q -O- https
://osm-download.etsi.org
/ftp
/osm-1.0
-one/README.txt
&> /dev
/null
276 [ -n "$LXD" ] && echo -e "\nConfiguring lxd" && install_lxd
278 echo -e "\nChecking required packages: wget, curl, tar"
279 dpkg
-l wget curl
tar &>/dev
/null ||
! echo -e " One or several packages are not installed.\nInstalling required packages\n Root privileges are required" || sudo apt
install -y wget curl
tar
281 echo -e "\nCreating the containers and building ..."
282 $OSM_DEVOPS/jenkins
/host
/start_build RO checkout
$COMMIT_ID
283 $OSM_DEVOPS/jenkins
/host
/start_build VCA
284 $OSM_DEVOPS/jenkins
/host
/start_build SO checkout
$COMMIT_ID
285 $OSM_DEVOPS/jenkins
/host
/start_build UI checkout
$COMMIT_ID
287 #Install iptables-persistent and configure NAT rules
290 #Configure components