README.md

<!--
Copyright ETSI

Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at

   http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
implied.
See the License for the specific language governing permissions and
limitations under the License
-->

# OSM test automation project - osm/tests

This repository contains tools and configuration files for testing and automation needs of OSM projet

## Prerequisites

- **Robot Framework**
- **Packages**: ssh ping yq git
- **Python3 packages**: haikunator requests robotframework robotframework-seleniumlibrary robotframework-requests robotframework-jsonlibrary robotframework-sshlibrary
- Clone **osm-packages** from gitlab
- Environment config file for your infrastructure `envfile.rc`

## Installing

This bash script can be used to setup your environment to execute the tests.

```bash
python3 -m pip install -r requirements.txt
python3 -m pip install -r requirements-dev.txt
# Download community packages
PACKAGES_FOLDER=osm-packages
git clone https://osm.etsi.org/gitlab/vnf-onboarding/osm-packages.git ${PACKAGES_FOLDER}
```

Configure a file `envfile.rc` copying from `envconfig-local.rc` and set the required variables

```bash
# VIM Setup
OS_USERNAME=<openstack_username>
OS_PASSWORD=<openstack_password>
OS_TENANT_NAME=<openstack_tenant_name>
OS_AUTH_URL=<openstack_authorization_url>
OS_TENANT_ID=<openstack_tenant_id>

# OSM Setup
OSM_HOSTNAME=<osm_ip_address>
VIM_TARGET=<osm_vim_name>
VIM_MGMT_NET=<osm_vim_mgmt_name>

# Clouds file datacenter
OS_CLOUD=<datacenter_in_clouds_file>
# SDNCs file
OS_SDNC=<SDN_controller_in_sdncs_file>

# K8S config file
K8S_CREDENTIALS=<path_to_kubeconfig>

# The following set of environment variables will be used in host
# of the robot framework. Not needed for docker execution

# Folder where Robot tests are stored
ROBOT_DEVOPS_FOLDER=robot-systest

# Folder to save alternative DUT environments (optional)
ENVIRONMENTS_FOLDER=environments

# Folder where all required packages are stored
PACKAGES_FOLDER=osm-packages

# Folder where test results should be exported
ROBOT_REPORT_FOLDER=results
```

## Running the tests

### From the host machine

If you have installed all the dependecnies, the way of executing the tests is via the following command:

```bash
source envfile.rc
robot -d reports -i <testing_tags> testsuite/
```

### From docker container

It is possible to run the tests directly from the repository or using a docker container with the tests.

Create the docker container:

```bash
docker build -f docker/Dockerfile -t osmtests .
```

Options:

- `--env-file`: It is the environmental file where is described the OSM target and VIM
- `-o <osmclient_version>` [OPTIONAL]: It is used to specify a particular osmclient version. Default: latest
- `-p <package_branch>` [OPTIONAL]: OSM packages repository branch. Default: master
- `-t <testing_tags>` [OPTIONAL]: Robot tests tags. [sanity, regression, particular_test]. Default: sanity

Volumes:

- <path_to_reports> [OPTIONAL]: It is the absolute path to reports location in the host
- <path_to_clouds.yaml> [OPTIONAL]: It is the absolute path to the clouds.yaml file in the host
- <path_to_sdncs.yaml> [OPTIONAL]: It is the absolute path to the sdncs.yaml file in the host
- <path_to_kubeconfig> [OPTIONAL]: It is the kubeconfig file to be used for k8s clusters

Then, run the tests:

```bash
docker run --rm=true -t osmtests --env-file <env_file> \
       -v <path_to_reports>:/reports osmtests \
       -v <path_to_clouds.yaml>:/robot-systest/clouds.yaml \
       -v <path_to_sdncs.yaml>:/robot-systest/sdncs.yaml \
       -v <path_to_kubeconfig>:/root/.kube/config \
       -o <osmclient_version> \
       -p <package_branch> \
       -t <testing_tags>
```

### From an environment identical to OSM CICD

````bash
git clone https://osm.etsi.org/gerrit/osm/devops
git clone https://osm.etsi.org/gerrit/osm/IM
git clone https://osm.etsi.org/gerrit/osm/osmclient
git clone https://osm.etsi.org/gerrit/osm/tests
# run HTTP server to server artifacts
devops/tools/local-build.sh --install-qhttpd
# generate debian packages locally that will be served by the HTTP server
devops/tools/local-build.sh --module IM,osmclient,tests stage-2
# create docker image and store it locally as opensourcemano/tests:devel
devops/tools/local-build.sh --module tests
```

Then, run the tests:

```bash
docker run --rm=true -t osmtests --env-file <env_file> \
       -v <path_to_reports>:/reports osmtests \
       -v <path_to_clouds.yaml>:/robot-systest/clouds.yaml \
       -v <path_to_sdncs.yaml>:/robot-systest/sdncs.yaml \
       -v <path_to_kubeconfig>:/root/.kube/config \
       -o <osmclient_version> \
       -p <package_branch> \
       -t <testing_tags>
```

## Test tags

All tests in the testsuites have tags. Tags allow to run only a set of tests
identified by a tag. Several tags can be specified when running robot in the
following way:

```bash
robot -i <tag_01> -i <tag_02> testsuite/
```

The following tags exist for each testsuite:

- A tag per testsuite using its mnemonic (e.g. `basic_01`)
- Cluster tag for each of the statistically similar tests:
  - `cluster_main`: `basic_01`, `basic_05`, `basic_08`, `basic_09`, `basic_15`,
    `basic_16`, `basic_17`, `hackfest_basic`, `hackfest_multivdu`,
    `hackfest_cloudinit`, `quotas_01`
  - `cluster_ee_config`: `basic_06`, `basic_07`, `basic_11`, `basic_12`,
    `basic_13`, `basic_14`, `k8s_05`, `k8s_06`
  - `cluster_relations`: `basic_11`, `basic_13`, `basic_14`
  - `cluster_epa`: `epa_01`, `epa_02`, `epa_03`, `epa_04`, `epa_05`
  - `cluster_k8s`: `k8s_01`, `k8s_02`, `k8s_03`, `k8s_04`, `k8s_05`, `k8s06`,
    `k8s_07`, `k8s_08`, `k8s_09`, `k8s_10`, `k8s_11`, `sa_08`
  - `cluster_k8s_charms`: `k8s_05`, `k8s_06`
  - `cluster_sa`: `sa_01`, `sa_02`, `sa_07`
  - `cluster_slices`: `slice_01`, `slice_02`
  - `cluster_heal`: `heal_01`, `heal_02`, `heal_03`, `heal_04`
- daily: for all testsuites that will run in the daily job
- regression: for all testsuites that should pass in the current stable branch
- sanity: for all testsuites that should be passed by each commit in the
  stage3 to be successfully verified by Jenkins, currently `basic_07`,
  `basic_11`, `k8s_03`, `k8s_04`, `sa_02`, `hackfest_basic`, `hackfest_cloudinit`

In addition, the tag "cleanup" exists in those tests that perform
any deletion. In that way, it can be invoked to retry the deletion if
the tests were forcefully stopped.

- For helping in the migration tests and other scenarios in which you don't want
to destroy the deployments immediately, the following tags are used:
  - prepare: for the tests that are used to deploy the network
  services under test
  - verify: for the tests that perform the actual testing, or changes for
  additional verifications (e.g. scaling).
  - cleanup: already described above.

  So, for instance, you could first deploy a number of network services executing
  the tests with "prepare" tag, migrate to another OSM version, and then
  check the behavior executing with the "verify" tag. Finally, use the "cleanup"
  tag. 

## Post-processing Robot output files

The output files of Robot include tyipically three files:

- `report.html`: overview of the test execution results in HTML format
- `log.html`: details about the executed test cases in HTML format
- `output.xml`: all the test execution results in machine readable XML format

More information about these files [here](https://robotframework.org/robotframework/latest/RobotFrameworkUserGuide.html#output-file).

It is possible to use the tool `rebot`, included as part of the Robot Framework, to post-process the output file `output.xml`.

```bash
# To re-generate log and report from output.xml:
rebot [-d <output_folder>] output.xml

# To re-generate log and report (and optionally new output.xml) to include only certain tags:
rebot [-d <output_folder>] -i <tag1> -i <tag2> ... -i <tagN> [-o <new_output_xml>] output.xml

# To re-generate log and report (and optionally new output.xml) excluding certain tags:
rebot [-d <output_folder>] -e <tag1> -e <tag2> ... -e <tagN> [-o <new_output_xml>] output.xml

# To merge several test executions:
rebot [-d <output_folder>] --merge output1.xml output2.xml ... outputN.xml
```

More information about post-processing Robot output files [here](https://robotframework.org/robotframework/latest/RobotFrameworkUserGuide.html#post-processing-outputs)

## Built With

* [Python](www.python.org/) - The language used
* [Robot Framework](robotframework.org) - The testing framework

## Contributing

Please read [CONTRIBUTING.md](CONTRIBUTING.md) for details on our code of conduct, and the process for submitting pull requests to us.

## Versioning

We use [SemVer](http://semver.org/) for versioning. For the versions available, see the [tags on this repository](https://osm.etsi.org/gitweb/?p=osm/tests.git;a=tags).

## License

This project is licensed under the Apache2 License - see the [LICENSE.md](LICENSE) file for details