#!/bin/bash # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. # function usage(){ [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function echo -e "usage: $0 [OPTIONS]" echo -e "Install OSM from binaries or source code (by default, from binaries)" echo -e " OPTIONS" echo -e " -h / --help: print this help" echo -e " -y: do not prompt for confirmation, assumes yes" echo -e " -r : use specified repository name for osm packages" echo -e " -R : use specified release for osm binaries (deb packages, lxd images, ...)" echo -e " -u : use specified repository url for osm packages" echo -e " -k : use specified repository public key url" echo -e " -b : install OSM from source code using a specific branch (master, v2.0, ...) or tag" echo -e " -b master (main dev branch)" echo -e " -b v2.0 (v2.0 branch)" echo -e " -b tags/v1.1.0 (a specific tag)" echo -e " ..." echo -e " -a : use this apt proxy url when downloading apt packages (air-gapped installation)" echo -e " -s or user defined stack name when installed using swarm or namespace when installed using k8s, default is osm" echo -e " -H use specific juju host controller IP" echo -e " -S use VCA/juju secret key" echo -e " -P use VCA/juju public key file" echo -e " -C use VCA/juju CA certificate file" echo -e " -A use VCA/juju API proxy" echo -e " --pla: install the PLA module for placement support" echo -e " -m : install OSM but only rebuild or pull the specified docker images (NG-UI, NBI, LCM, RO, MON, POL, PLA, KAFKA, MONGO, PROMETHEUS, PROMETHEUS-CADVISOR, KEYSTONE-DB, NONE)" echo -e " -o : ONLY (un)installs one of the addons (k8s_monitor)" echo -e " -O : Install OSM to an OpenStack infrastructure. is required. If a is used, the clouds.yaml file should be under ~/.config/openstack/ or /etc/openstack/" echo -e " -N : Public network name required to setup OSM to OpenStack" echo -e " -f : Public SSH key to use to deploy OSM to OpenStack" echo -e " -F : Cloud-Init userdata file to deploy OSM to OpenStack" echo -e " -D use local devops installation path" echo -e " -w Location to store runtime installation" echo -e " -t specify osm docker tag (default is latest)" echo -e " -l: LXD cloud yaml file" echo -e " -L: LXD credentials yaml file" echo -e " -K: Specifies the name of the controller to use - The controller must be already bootstrapped" echo -e " -d use docker registry URL instead of dockerhub" echo -e " -p set docker proxy URL as part of docker CE configuration" echo -e " -T specify docker tag for the modules specified with option -m" echo -e " --debug: debug mode" echo -e " --nocachelxdimages: do not cache local lxd images, do not create cronjob for that cache (will save installation time, might affect instantiation time)" echo -e " --cachelxdimages: cache local lxd images, create cronjob for that cache (will make installation longer)" echo -e " --nolxd: do not install and configure LXD, allowing unattended installations (assumes LXD is already installed and confifured)" echo -e " --nodocker: do not install docker, do not initialize a swarm (assumes docker is already installed and a swarm has been initialized)" echo -e " --nojuju: do not juju, assumes already installed" echo -e " --nodockerbuild:do not build docker images (use existing locally cached images)" echo -e " --nohostports: do not expose docker ports to host (useful for creating multiple instances of osm on the same host)" echo -e " --nohostclient: do not install the osmclient" echo -e " --uninstall: uninstall OSM: remove the containers and delete NAT rules" echo -e " --source: install OSM from source code using the latest stable tag" echo -e " --develop: (deprecated, use '-b master') install OSM from source code using the master branch" echo -e " --pullimages: pull/run osm images from docker.io/opensourcemano" echo -e " --k8s_monitor: install the OSM kubernetes monitoring with prometheus and grafana" echo -e " --volume: create a VM volume when installing to OpenStack" echo -e " --showopts: print chosen options and exit (only for debugging)" echo -e " --charmed: Deploy and operate OSM with Charms on k8s" echo -e " [--bundle ]: Specify with which bundle to deploy OSM with charms (--charmed option)" echo -e " [--k8s ]: Specify with which kubernetes to deploy OSM with charms (--charmed option)" echo -e " [--vca ]: Specifies the name of the controller to use - The controller must be already bootstrapped (--charmed option)" echo -e " [--small-profile]: Do not install and configure LXD which aims to use only K8s Clouds (--charmed option)" echo -e " [--lxd ]: Takes a YAML file as a parameter with the LXD Cloud information (--charmed option)" echo -e " [--lxd-cred ]: Takes a YAML file as a parameter with the LXD Credentials information (--charmed option)" echo -e " [--microstack]: Installs microstack as a vim. (--charmed option)" echo -e " [--overlay]: Add an overlay to override some defaults of the default bundle (--charmed option)" echo -e " [--ha]: Installs High Availability bundle. (--charmed option)" echo -e " [--tag]: Docker image tag. (--charmed option)" echo -e " [--registry]: Docker registry with optional credentials as user:pass@hostname:port (--charmed option)" [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function } # takes a juju/accounts.yaml file and returns the password specific # for a controller. I wrote this using only bash tools to minimize # additions of other packages function parse_juju_password { [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function password_file="${HOME}/.local/share/juju/accounts.yaml" local controller_name=$1 local s='[[:space:]]*' w='[a-zA-Z0-9_-]*' fs=$(echo @|tr @ '\034') sed -ne "s|^\($s\):|\1|" \ -e "s|^\($s\)\($w\)$s:$s[\"']\(.*\)[\"']$s\$|\1$fs\2$fs\3|p" \ -e "s|^\($s\)\($w\)$s:$s\(.*\)$s\$|\1$fs\2$fs\3|p" $password_file | awk -F$fs -v controller=$controller_name '{ indent = length($1)/2; vname[indent] = $2; for (i in vname) {if (i > indent) {delete vname[i]}} if (length($3) > 0) { vn=""; for (i=0; i /dev/null if [ $? -eq 0 ]; then sudo snap refresh lxd --channel $LXD_VERSION/stable else sudo snap install lxd --channel $LXD_VERSION/stable fi # Configure LXD sudo usermod -a -G lxd `whoami` cat ${OSM_DEVOPS}/installers/lxd-preseed.conf | sed 's/^config: {}/config:\n core.https_address: '$DEFAULT_IP':8443/' | sg lxd -c "lxd init --preseed" sg lxd -c "lxd waitready" DEFAULT_IF=$(ip route list|awk '$1=="default" {print $5; exit}') [ -z "$DEFAULT_IF" ] && DEFAULT_IF=$(route -n |awk '$1~/^0.0.0.0/ {print $8; exit}') [ -z "$DEFAULT_IF" ] && FATAL "Not possible to determine the interface with the default route 0.0.0.0" DEFAULT_MTU=$(ip addr show ${DEFAULT_IF} | perl -ne 'if (/mtu\s(\d+)/) {print $1;}') sg lxd -c "lxc profile device set default eth0 mtu $DEFAULT_MTU" sg lxd -c "lxc network set lxdbr0 bridge.mtu $DEFAULT_MTU" #sudo systemctl stop lxd-bridge #sudo systemctl --system daemon-reload #sudo systemctl enable lxd-bridge #sudo systemctl start lxd-bridge [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function } function ask_user(){ # ask to the user and parse a response among 'y', 'yes', 'n' or 'no'. Case insensitive # Params: $1 text to ask; $2 Action by default, can be 'y' for yes, 'n' for no, other or empty for not allowed # Return: true(0) if user type 'yes'; false (1) if user type 'no' [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function read -e -p "$1" USER_CONFIRMATION while true ; do [ -z "$USER_CONFIRMATION" ] && [ "$2" == 'y' ] && return 0 [ -z "$USER_CONFIRMATION" ] && [ "$2" == 'n' ] && return 1 [ "${USER_CONFIRMATION,,}" == "yes" ] || [ "${USER_CONFIRMATION,,}" == "y" ] && return 0 [ "${USER_CONFIRMATION,,}" == "no" ] || [ "${USER_CONFIRMATION,,}" == "n" ] && return 1 read -e -p "Please type 'yes' or 'no': " USER_CONFIRMATION done [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function } function install_osmclient(){ [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function CLIENT_RELEASE=${RELEASE#"-R "} CLIENT_REPOSITORY_KEY="OSM%20ETSI%20Release%20Key.gpg" CLIENT_REPOSITORY=${REPOSITORY#"-r "} CLIENT_REPOSITORY_BASE=${REPOSITORY_BASE#"-u "} key_location=$CLIENT_REPOSITORY_BASE/$CLIENT_RELEASE/$CLIENT_REPOSITORY_KEY curl $key_location | sudo APT_KEY_DONT_WARN_ON_DANGEROUS_USAGE=1 apt-key add - sudo add-apt-repository -y "deb [arch=amd64] $CLIENT_REPOSITORY_BASE/$CLIENT_RELEASE $CLIENT_REPOSITORY osmclient IM" sudo apt-get update sudo apt-get install -y python3-pip sudo -H LC_ALL=C python3 -m pip install -U pip sudo -H LC_ALL=C python3 -m pip install -U python-magic pyangbind verboselogs sudo apt-get install -y python3-osm-im python3-osmclient if [ -f /usr/lib/python3/dist-packages/osm_im/requirements.txt ]; then python3 -m pip install -r /usr/lib/python3/dist-packages/osm_im/requirements.txt fi if [ -f /usr/lib/python3/dist-packages/osmclient/requirements.txt ]; then sudo apt-get install -y libcurl4-openssl-dev libssl-dev libmagic1 python3 -m pip install -r /usr/lib/python3/dist-packages/osmclient/requirements.txt fi [ -z "$INSTALL_LIGHTWEIGHT" ] && export OSM_HOSTNAME=`lxc list | awk '($2=="SO-ub"){print $6}'` [ -z "$INSTALL_LIGHTWEIGHT" ] && export OSM_RO_HOSTNAME=`lxc list | awk '($2=="RO"){print $6}'` echo -e "\nOSM client installed" if [ -z "$INSTALL_LIGHTWEIGHT" ]; then echo -e "You might be interested in adding the following OSM client env variables to your .bashrc file:" echo " export OSM_HOSTNAME=${OSM_HOSTNAME}" echo " export OSM_RO_HOSTNAME=${OSM_RO_HOSTNAME}" else echo -e "OSM client assumes that OSM host is running in localhost (127.0.0.1)." echo -e "In case you want to interact with a different OSM host, you will have to configure this env variable in your .bashrc file:" echo " export OSM_HOSTNAME=" fi [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function return 0 } function docker_login() { [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function echo "Docker login" [ -z "${DEBUG_INSTALL}" ] || DEBUG "Docker registry user: ${DOCKER_REGISTRY_USER}" sg docker -c "docker login -u ${DOCKER_REGISTRY_USER} -p ${DOCKER_REGISTRY_PASSWORD} --password-stdin" [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function } function generate_docker_images() { [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function echo "Pulling and generating docker images" [ -n "${DOCKER_REGISTRY_URL}" ] && docker_login echo "Pulling docker images" if [ -z "$TO_REBUILD" ] || echo $TO_REBUILD | grep -q KAFKA ; then sg docker -c "docker pull wurstmeister/zookeeper" || FATAL "cannot get zookeeper docker image" sg docker -c "docker pull wurstmeister/kafka:${KAFKA_TAG}" || FATAL "cannot get kafka docker image" fi if [ -z "$TO_REBUILD" ] || echo $TO_REBUILD | grep -q PROMETHEUS ; then sg docker -c "docker pull prom/prometheus:${PROMETHEUS_TAG}" || FATAL "cannot get prometheus docker image" fi if [ -z "$TO_REBUILD" ] || echo $TO_REBUILD | grep -q PROMETHEUS-CADVISOR ; then sg docker -c "docker pull google/cadvisor:${PROMETHEUS_CADVISOR_TAG}" || FATAL "cannot get prometheus cadvisor docker image" fi if [ -z "$TO_REBUILD" ] || echo $TO_REBUILD | grep -q GRAFANA ; then sg docker -c "docker pull grafana/grafana:${GRAFANA_TAG}" || FATAL "cannot get grafana docker image" sg docker -c "docker pull kiwigrid/k8s-sidecar:${KIWIGRID_K8S_SIDECAR_TAG}" || FATAL "cannot get kiwigrid k8s-sidecar docker image" fi if [ -z "$TO_REBUILD" ] || echo $TO_REBUILD | grep -q NBI || echo $TO_REBUILD | grep -q KEYSTONE-DB ; then sg docker -c "docker pull mariadb:${KEYSTONEDB_TAG}" || FATAL "cannot get keystone-db docker image" fi if [ -z "$TO_REBUILD" ] || echo $TO_REBUILD | grep -q RO ; then sg docker -c "docker pull mysql:5" || FATAL "cannot get mysql docker image" fi if [ -n "$PULL_IMAGES" ]; then echo "Pulling OSM docker images" for module in MON POL NBI KEYSTONE RO LCM NG-UI PLA osmclient; do module_lower=${module,,} if [ $module == "PLA" -a ! -n "$INSTALL_PLA" ]; then continue fi module_tag="${OSM_DOCKER_TAG}" if [ -n "${MODULE_DOCKER_TAG}" ] && echo $TO_REBUILD | grep -q $module ; then module_tag="${MODULE_DOCKER_TAG}" fi echo "Pulling ${DOCKER_REGISTRY_URL}${DOCKER_USER}/${module_lower}:${module_tag} docker image" sg docker -c "docker pull ${DOCKER_REGISTRY_URL}${DOCKER_USER}/${module_lower}:${module_tag}" || FATAL "cannot pull $module docker image" done else _build_from=$COMMIT_ID [ -z "$_build_from" ] && _build_from="latest" echo "OSM Docker images generated from $_build_from" LWTEMPDIR="$(mktemp -d -q --tmpdir "installosmlight.XXXXXX")" trap 'rm -rf "${LWTEMPDIR}"' EXIT for module in MON POL NBI KEYSTONE RO LCM NG-UI PLA; do if [ -z "$TO_REBUILD" ] || echo $TO_REBUILD | grep -q ${module} ; then module_lower=${module,,} if [ $module == "PLA" -a ! -n "$INSTALL_PLA" ]; then continue fi git -C ${LWTEMPDIR} clone https://osm.etsi.org/gerrit/osm/$module git -C ${LWTEMPDIR}/${module} checkout ${COMMIT_ID} sg docker -c "docker build ${LWTEMPDIR}/${module} -f ${LWTEMPDIR}/${module}/docker/Dockerfile -t ${DOCKER_USER}/${module_lower} --no-cache" || FATAL "cannot build ${module} docker image" fi done if [ -z "$TO_REBUILD" ] || echo $TO_REBUILD | grep -q osmclient; then BUILD_ARGS+=(--build-arg REPOSITORY="$REPOSITORY") BUILD_ARGS+=(--build-arg RELEASE="$RELEASE") BUILD_ARGS+=(--build-arg REPOSITORY_KEY="$REPOSITORY_KEY") BUILD_ARGS+=(--build-arg REPOSITORY_BASE="$REPOSITORY_BASE") sg docker -c "docker build -t ${DOCKER_USER}/osmclient ${BUILD_ARGS[@]} -f $OSM_DEVOPS/docker/osmclient ." fi echo "Finished generation of docker images" fi echo "Finished pulling and generating docker images" [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function } function cmp_overwrite() { [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function file1="$1" file2="$2" if ! $(cmp "${file1}" "${file2}" >/dev/null 2>&1); then if [ -f "${file2}" ]; then ask_user "The file ${file2} already exists. Overwrite (y/N)? " n && cp -b ${file1} ${file2} else cp -b ${file1} ${file2} fi fi [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function } function generate_k8s_manifest_files() { [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function #Kubernetes resources sudo cp -bR ${OSM_DEVOPS}/installers/docker/osm_pods $OSM_DOCKER_WORK_DIR [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function } function generate_prometheus_grafana_files() { #this only works with docker swarm [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function # Prometheus files sudo mkdir -p $OSM_DOCKER_WORK_DIR/prometheus sudo cp -b ${OSM_DEVOPS}/installers/docker/prometheus/prometheus.yml $OSM_DOCKER_WORK_DIR/prometheus/prometheus.yml # Grafana files sudo mkdir -p $OSM_DOCKER_WORK_DIR/grafana sudo cp -b ${OSM_DEVOPS}/installers/docker/grafana/dashboards-osm.yml $OSM_DOCKER_WORK_DIR/grafana/dashboards-osm.yml sudo cp -b ${OSM_DEVOPS}/installers/docker/grafana/datasource-prometheus.yml $OSM_DOCKER_WORK_DIR/grafana/datasource-prometheus.yml sudo cp -b ${OSM_DEVOPS}/installers/docker/grafana/osm-sample-dashboard.json $OSM_DOCKER_WORK_DIR/grafana/osm-sample-dashboard.json sudo cp -b ${OSM_DEVOPS}/installers/docker/grafana/osm-system-dashboard.json $OSM_DOCKER_WORK_DIR/grafana/osm-system-dashboard.json # Prometheus Exporters files sudo mkdir -p $OSM_DOCKER_WORK_DIR/prometheus_exporters sudo cp -b ${OSM_DEVOPS}/installers/docker/prometheus_exporters/node_exporter.service $OSM_DOCKER_WORK_DIR/prometheus_exporters/node_exporter.service [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function } function generate_docker_env_files() { [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function echo "Doing a backup of existing env files" sudo cp $OSM_DOCKER_WORK_DIR/keystone-db.env{,~} sudo cp $OSM_DOCKER_WORK_DIR/keystone.env{,~} sudo cp $OSM_DOCKER_WORK_DIR/lcm.env{,~} sudo cp $OSM_DOCKER_WORK_DIR/mon.env{,~} sudo cp $OSM_DOCKER_WORK_DIR/nbi.env{,~} sudo cp $OSM_DOCKER_WORK_DIR/pol.env{,~} sudo cp $OSM_DOCKER_WORK_DIR/ro-db.env{,~} sudo cp $OSM_DOCKER_WORK_DIR/ro.env{,~} echo "Generating docker env files" # LCM if [ ! -f $OSM_DOCKER_WORK_DIR/lcm.env ]; then echo "OSMLCM_DATABASE_COMMONKEY=${OSM_DATABASE_COMMONKEY}" | sudo tee -a $OSM_DOCKER_WORK_DIR/lcm.env fi if ! grep -Fq "OSMLCM_VCA_HOST" $OSM_DOCKER_WORK_DIR/lcm.env; then echo "OSMLCM_VCA_HOST=${OSM_VCA_HOST}" | sudo tee -a $OSM_DOCKER_WORK_DIR/lcm.env else sudo sed -i "s|OSMLCM_VCA_HOST.*|OSMLCM_VCA_HOST=$OSM_VCA_HOST|g" $OSM_DOCKER_WORK_DIR/lcm.env fi if ! grep -Fq "OSMLCM_VCA_SECRET" $OSM_DOCKER_WORK_DIR/lcm.env; then echo "OSMLCM_VCA_SECRET=${OSM_VCA_SECRET}" | sudo tee -a $OSM_DOCKER_WORK_DIR/lcm.env else sudo sed -i "s|OSMLCM_VCA_SECRET.*|OSMLCM_VCA_SECRET=$OSM_VCA_SECRET|g" $OSM_DOCKER_WORK_DIR/lcm.env fi if ! grep -Fq "OSMLCM_VCA_PUBKEY" $OSM_DOCKER_WORK_DIR/lcm.env; then echo "OSMLCM_VCA_PUBKEY=${OSM_VCA_PUBKEY}" | sudo tee -a $OSM_DOCKER_WORK_DIR/lcm.env else sudo sed -i "s|OSMLCM_VCA_PUBKEY.*|OSMLCM_VCA_PUBKEY=${OSM_VCA_PUBKEY}|g" $OSM_DOCKER_WORK_DIR/lcm.env fi if ! grep -Fq "OSMLCM_VCA_CACERT" $OSM_DOCKER_WORK_DIR/lcm.env; then echo "OSMLCM_VCA_CACERT=${OSM_VCA_CACERT}" | sudo tee -a $OSM_DOCKER_WORK_DIR/lcm.env else sudo sed -i "s|OSMLCM_VCA_CACERT.*|OSMLCM_VCA_CACERT=${OSM_VCA_CACERT}|g" $OSM_DOCKER_WORK_DIR/lcm.env fi if [ -n "$OSM_VCA_APIPROXY" ]; then if ! grep -Fq "OSMLCM_VCA_APIPROXY" $OSM_DOCKER_WORK_DIR/lcm.env; then echo "OSMLCM_VCA_APIPROXY=${OSM_VCA_APIPROXY}" | sudo tee -a $OSM_DOCKER_WORK_DIR/lcm.env else sudo sed -i "s|OSMLCM_VCA_APIPROXY.*|OSMLCM_VCA_APIPROXY=${OSM_VCA_APIPROXY}|g" $OSM_DOCKER_WORK_DIR/lcm.env fi fi if ! grep -Fq "OSMLCM_VCA_ENABLEOSUPGRADE" $OSM_DOCKER_WORK_DIR/lcm.env; then echo "# OSMLCM_VCA_ENABLEOSUPGRADE=false" | sudo tee -a $OSM_DOCKER_WORK_DIR/lcm.env fi if ! grep -Fq "OSMLCM_VCA_APTMIRROR" $OSM_DOCKER_WORK_DIR/lcm.env; then echo "# OSMLCM_VCA_APTMIRROR=http://archive.ubuntu.com/ubuntu/" | sudo tee -a $OSM_DOCKER_WORK_DIR/lcm.env fi if ! grep -Fq "OSMLCM_VCA_CLOUD" $OSM_DOCKER_WORK_DIR/lcm.env; then echo "OSMLCM_VCA_CLOUD=${OSM_VCA_CLOUDNAME}" | sudo tee -a $OSM_DOCKER_WORK_DIR/lcm.env else sudo sed -i "s|OSMLCM_VCA_CLOUD.*|OSMLCM_VCA_CLOUD=${OSM_VCA_CLOUDNAME}|g" $OSM_DOCKER_WORK_DIR/lcm.env fi if ! grep -Fq "OSMLCM_VCA_K8S_CLOUD" $OSM_DOCKER_WORK_DIR/lcm.env; then echo "OSMLCM_VCA_K8S_CLOUD=${OSM_VCA_K8S_CLOUDNAME}" | sudo tee -a $OSM_DOCKER_WORK_DIR/lcm.env else sudo sed -i "s|OSMLCM_VCA_K8S_CLOUD.*|OSMLCM_VCA_K8S_CLOUD=${OSM_VCA_K8S_CLOUDNAME}|g" $OSM_DOCKER_WORK_DIR/lcm.env fi # RO MYSQL_ROOT_PASSWORD=$(generate_secret) if [ ! -f $OSM_DOCKER_WORK_DIR/ro-db.env ]; then echo "MYSQL_ROOT_PASSWORD=${MYSQL_ROOT_PASSWORD}" |sudo tee $OSM_DOCKER_WORK_DIR/ro-db.env fi if [ ! -f $OSM_DOCKER_WORK_DIR/ro.env ]; then echo "RO_DB_ROOT_PASSWORD=${MYSQL_ROOT_PASSWORD}" |sudo tee $OSM_DOCKER_WORK_DIR/ro.env fi if ! grep -Fq "OSMRO_DATABASE_COMMONKEY" $OSM_DOCKER_WORK_DIR/ro.env; then echo "OSMRO_DATABASE_COMMONKEY=${OSM_DATABASE_COMMONKEY}" | sudo tee -a $OSM_DOCKER_WORK_DIR/ro.env fi # Keystone KEYSTONE_DB_PASSWORD=$(generate_secret) SERVICE_PASSWORD=$(generate_secret) if [ ! -f $OSM_DOCKER_WORK_DIR/keystone-db.env ]; then echo "MYSQL_ROOT_PASSWORD=${MYSQL_ROOT_PASSWORD}" |sudo tee $OSM_DOCKER_WORK_DIR/keystone-db.env fi if [ ! -f $OSM_DOCKER_WORK_DIR/keystone.env ]; then echo "ROOT_DB_PASSWORD=${MYSQL_ROOT_PASSWORD}" |sudo tee $OSM_DOCKER_WORK_DIR/keystone.env echo "KEYSTONE_DB_PASSWORD=${KEYSTONE_DB_PASSWORD}" |sudo tee -a $OSM_DOCKER_WORK_DIR/keystone.env echo "SERVICE_PASSWORD=${SERVICE_PASSWORD}" |sudo tee -a $OSM_DOCKER_WORK_DIR/keystone.env fi # NBI if [ ! -f $OSM_DOCKER_WORK_DIR/nbi.env ]; then echo "OSMNBI_AUTHENTICATION_SERVICE_PASSWORD=${SERVICE_PASSWORD}" |sudo tee $OSM_DOCKER_WORK_DIR/nbi.env echo "OSMNBI_DATABASE_COMMONKEY=${OSM_DATABASE_COMMONKEY}" | sudo tee -a $OSM_DOCKER_WORK_DIR/nbi.env fi # MON if [ ! -f $OSM_DOCKER_WORK_DIR/mon.env ]; then echo "OSMMON_KEYSTONE_SERVICE_PASSWORD=${SERVICE_PASSWORD}" | sudo tee -a $OSM_DOCKER_WORK_DIR/mon.env echo "OSMMON_DATABASE_COMMONKEY=${OSM_DATABASE_COMMONKEY}" | sudo tee -a $OSM_DOCKER_WORK_DIR/mon.env echo "OSMMON_SQL_DATABASE_URI=mysql://root:${MYSQL_ROOT_PASSWORD}@mysql:3306/mon" | sudo tee -a $OSM_DOCKER_WORK_DIR/mon.env fi if ! grep -Fq "OS_NOTIFIER_URI" $OSM_DOCKER_WORK_DIR/mon.env; then echo "OS_NOTIFIER_URI=http://${DEFAULT_IP}:8662" |sudo tee -a $OSM_DOCKER_WORK_DIR/mon.env else sudo sed -i "s|OS_NOTIFIER_URI.*|OS_NOTIFIER_URI=http://$DEFAULT_IP:8662|g" $OSM_DOCKER_WORK_DIR/mon.env fi if ! grep -Fq "OSMMON_VCA_HOST" $OSM_DOCKER_WORK_DIR/mon.env; then echo "OSMMON_VCA_HOST=${OSM_VCA_HOST}" | sudo tee -a $OSM_DOCKER_WORK_DIR/mon.env else sudo sed -i "s|OSMMON_VCA_HOST.*|OSMMON_VCA_HOST=$OSM_VCA_HOST|g" $OSM_DOCKER_WORK_DIR/mon.env fi if ! grep -Fq "OSMMON_VCA_SECRET" $OSM_DOCKER_WORK_DIR/mon.env; then echo "OSMMON_VCA_SECRET=${OSM_VCA_SECRET}" | sudo tee -a $OSM_DOCKER_WORK_DIR/mon.env else sudo sed -i "s|OSMMON_VCA_SECRET.*|OSMMON_VCA_SECRET=$OSM_VCA_SECRET|g" $OSM_DOCKER_WORK_DIR/mon.env fi if ! grep -Fq "OSMMON_VCA_CACERT" $OSM_DOCKER_WORK_DIR/mon.env; then echo "OSMMON_VCA_CACERT=${OSM_VCA_CACERT}" | sudo tee -a $OSM_DOCKER_WORK_DIR/mon.env else sudo sed -i "s|OSMMON_VCA_CACERT.*|OSMMON_VCA_CACERT=${OSM_VCA_CACERT}|g" $OSM_DOCKER_WORK_DIR/mon.env fi # POL if [ ! -f $OSM_DOCKER_WORK_DIR/pol.env ]; then echo "OSMPOL_SQL_DATABASE_URI=mysql://root:${MYSQL_ROOT_PASSWORD}@mysql:3306/pol" | sudo tee -a $OSM_DOCKER_WORK_DIR/pol.env fi echo "Finished generation of docker env files" [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function } #creates secrets from env files which will be used by containers function kube_secrets(){ [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function kubectl create ns $OSM_STACK_NAME kubectl create secret generic lcm-secret -n $OSM_STACK_NAME --from-env-file=$OSM_DOCKER_WORK_DIR/lcm.env kubectl create secret generic mon-secret -n $OSM_STACK_NAME --from-env-file=$OSM_DOCKER_WORK_DIR/mon.env kubectl create secret generic nbi-secret -n $OSM_STACK_NAME --from-env-file=$OSM_DOCKER_WORK_DIR/nbi.env kubectl create secret generic ro-db-secret -n $OSM_STACK_NAME --from-env-file=$OSM_DOCKER_WORK_DIR/ro-db.env kubectl create secret generic ro-secret -n $OSM_STACK_NAME --from-env-file=$OSM_DOCKER_WORK_DIR/ro.env kubectl create secret generic keystone-secret -n $OSM_STACK_NAME --from-env-file=$OSM_DOCKER_WORK_DIR/keystone.env kubectl create secret generic pol-secret -n $OSM_STACK_NAME --from-env-file=$OSM_DOCKER_WORK_DIR/pol.env [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function } #deploys osm pods and services function deploy_osm_services() { [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function kubectl apply -n $OSM_STACK_NAME -f $OSM_K8S_WORK_DIR [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function } #deploy charmed services function deploy_charmed_services() { [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function juju add-model $OSM_STACK_NAME $OSM_VCA_K8S_CLOUDNAME juju deploy ch:mongodb-k8s -m $OSM_STACK_NAME [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function } function deploy_osm_pla_service() { [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function # corresponding to namespace_vol sudo sed -i "s#path: /var/lib/osm#path: $OSM_NAMESPACE_VOL#g" $OSM_DOCKER_WORK_DIR/osm_pla/pla.yaml # corresponding to deploy_osm_services kubectl apply -n $OSM_STACK_NAME -f $OSM_DOCKER_WORK_DIR/osm_pla [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function } function parse_yaml() { [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function TAG=$1 shift services=$@ for module in $services; do if [ "$module" == "pla" ]; then if [ -n "$INSTALL_PLA" ]; then echo "Updating K8s manifest file from opensourcemano\/${module}:.* to ${DOCKER_REGISTRY_URL}${DOCKER_USER}\/${module}:${TAG}" sudo sed -i "s#opensourcemano/pla:.*#${DOCKER_REGISTRY_URL}${DOCKER_USER}/pla:${TAG}#g" ${OSM_DOCKER_WORK_DIR}/osm_pla/pla.yaml fi else echo "Updating K8s manifest file from opensourcemano\/${module}:.* to ${DOCKER_REGISTRY_URL}${DOCKER_USER}\/${module}:${TAG}" sudo sed -i "s#opensourcemano/${module}:.*#${DOCKER_REGISTRY_URL}${DOCKER_USER}/${module}:${TAG}#g" ${OSM_K8S_WORK_DIR}/${module}.yaml fi done [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function } function update_manifest_files() { osm_services="nbi lcm ro pol mon ng-ui keystone pla prometheus" list_of_services="" for module in $osm_services; do module_upper="${module^^}" if ! echo $TO_REBUILD | grep -q $module_upper ; then list_of_services="$list_of_services $module" fi done if [ ! "$OSM_DOCKER_TAG" == "12" ]; then parse_yaml $OSM_DOCKER_TAG $list_of_services fi if [ -n "$MODULE_DOCKER_TAG" ]; then parse_yaml $MODULE_DOCKER_TAG $list_of_services_to_rebuild fi [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function } function namespace_vol() { [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function osm_services="nbi lcm ro pol mon kafka mysql prometheus" for osm in $osm_services; do sudo sed -i "s#path: /var/lib/osm#path: $OSM_NAMESPACE_VOL#g" $OSM_K8S_WORK_DIR/$osm.yaml done [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function } function add_local_k8scluster() { [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function /usr/bin/osm --all-projects vim-create \ --name _system-osm-vim \ --account_type dummy \ --auth_url http://dummy \ --user osm --password osm --tenant osm \ --description "dummy" \ --config '{management_network_name: mgmt}' /usr/bin/osm --all-projects k8scluster-add \ --creds ${HOME}/.kube/config \ --vim _system-osm-vim \ --k8s-nets '{"net1": null}' \ --version '1.15' \ --description "OSM Internal Cluster" \ _system-osm-k8s [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function } function configure_apt_proxy() { [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function OSM_APT_PROXY=$1 OSM_APT_PROXY_FILE="/etc/apt/apt.conf.d/osm-apt" echo "Configuring apt proxy in file ${OSM_APT_PROXY_FILE}" if [ ! -f ${OSM_APT_PROXY_FILE} ]; then sudo bash -c "cat < ${OSM_APT_PROXY} Acquire::http { Proxy \"${OSM_APT_PROXY}\"; } EOF" else sudo sed -i "s|Proxy.*|Proxy \"${OSM_APT_PROXY}\"; }|" ${OSM_APT_PROXY_FILE} fi sudo apt-get update || FATAL "Configured apt proxy, but couldn't run 'apt-get update'. Check ${OSM_APT_PROXY_FILE}" track prereq apt_proxy_configured_ok [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function } function install_osm() { [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function trap ctrl_c INT track start release $RELEASE none none docker_tag $OSM_DOCKER_TAG none none installation_type $OSM_INSTALLATION_TYPE none none track checks checkingroot_ok [ "$USER" == "root" ] && FATAL "You are running the installer as root. The installer is prepared to be executed as a normal user with sudo privileges." track checks noroot_ok [ -z "$ASSUME_YES" ] && ! ask_user "The installation will do the following 1. Install and configure LXD 2. Install juju 3. Install docker CE 4. Disable swap space 5. Install and initialize Kubernetes as pre-requirements. Do you want to proceed (Y/n)? " y && echo "Cancelled!" && exit 1 track checks proceed_ok echo "Installing OSM" echo "Determining IP address of the interface with the default route" DEFAULT_IF=$(ip route list|awk '$1=="default" {print $5; exit}') [ -z "$DEFAULT_IF" ] && DEFAULT_IF=$(route -n |awk '$1~/^0.0.0.0/ {print $8; exit}') [ -z "$DEFAULT_IF" ] && FATAL "Not possible to determine the interface with the default route 0.0.0.0" DEFAULT_IP=`ip -o -4 a s ${DEFAULT_IF} |awk '{split($4,a,"/"); print a[1]; exit}'` [ -z "$DEFAULT_IP" ] && FATAL "Not possible to determine the IP address of the interface with the default route" # configure apt proxy [ -n "$APT_PROXY_URL" ] && configure_apt_proxy $APT_PROXY_URL # if no host is passed in, we need to install lxd/juju, unless explicilty asked not to if [ -z "$OSM_VCA_HOST" ] && [ -z "$INSTALL_NOLXD" ] && [ -z "$LXD_CLOUD_FILE" ]; then install_lxd fi track prereq prereqok_ok if [ ! -n "$INSTALL_NODOCKER" ]; then DOCKER_CE_OPTS="-D ${OSM_DEVOPS} ${DEBUG_INSTALL}" [ -n "${DOCKER_PROXY_URL}" ] && DOCKER_CE_OPTS="${DOCKER_CE_OPTS} -p ${DOCKER_PROXY_URL}" $OSM_DEVOPS/installers/install_docker_ce.sh ${DOCKER_CE_OPTS} || FATAL_TRACK docker_ce "install_docker_ce.sh failed" fi track docker_ce docker_ce_ok echo "Creating folders for installation" [ ! -d "$OSM_DOCKER_WORK_DIR" ] && sudo mkdir -p $OSM_DOCKER_WORK_DIR [ ! -d "$OSM_DOCKER_WORK_DIR/osm_pla" -a -n "$INSTALL_PLA" ] && sudo mkdir -p $OSM_DOCKER_WORK_DIR/osm_pla sudo cp -b $OSM_DEVOPS/installers/docker/cluster-config.yaml $OSM_DOCKER_WORK_DIR/cluster-config.yaml $OSM_DEVOPS/installers/install_kubeadm_cluster.sh -i ${DEFAULT_IP} -d ${OSM_DOCKER_WORK_DIR} -D ${OSM_DEVOPS} ${DEBUG_INSTALL} || \ FATAL_TRACK k8scluster "install_kubeadm_cluster.sh failed" track k8scluster k8scluster_ok JUJU_OPTS="-D ${OSM_DEVOPS} -s ${OSM_STACK_NAME} -i ${DEFAULT_IP} ${DEBUG_INSTALL} ${INSTALL_NOJUJU} ${INSTALL_CACHELXDIMAGES}" [ -n "${OSM_VCA_HOST}" ] && JUJU_OPTS="$JUJU_OPTS -H ${OSM_VCA_HOST}" [ -n "${LXD_CLOUD_FILE}" ] && JUJU_OPTS="$JUJU_OPTS -l ${LXD_CLOUD_FILE}" [ -n "${LXD_CRED_FILE}" ] && JUJU_OPTS="$JUJU_OPTS -L ${LXD_CRED_FILE}" [ -n "${CONTROLLER_NAME}" ] && JUJU_OPTS="$JUJU_OPTS -K ${CONTROLLER_NAME}" $OSM_DEVOPS/installers/install_juju.sh ${JUJU_OPTS} || FATAL_TRACK juju "install_juju.sh failed" set_vca_variables track juju juju_ok if [ -z "$OSM_DATABASE_COMMONKEY" ]; then OSM_DATABASE_COMMONKEY=$(generate_secret) [ -z "OSM_DATABASE_COMMONKEY" ] && FATAL "Cannot generate common db secret" fi # Deploy OSM services [ -z "$DOCKER_NOBUILD" ] && generate_docker_images track docker_images docker_images_ok generate_k8s_manifest_files track osm_files manifest_files_ok generate_docker_env_files track osm_files env_files_ok deploy_charmed_services track deploy_osm deploy_charmed_services_ok kube_secrets track deploy_osm kube_secrets_ok update_manifest_files track deploy_osm update_manifest_files_ok namespace_vol track deploy_osm namespace_vol_ok deploy_osm_services track deploy_osm deploy_osm_services_k8s_ok if [ -n "$INSTALL_PLA"]; then # optional PLA install deploy_osm_pla_service track deploy_osm deploy_osm_pla_ok fi if [ -n "$INSTALL_K8S_MONITOR" ]; then # install OSM MONITORING install_k8s_monitoring track deploy_osm install_k8s_monitoring_ok fi [ -z "$INSTALL_NOHOSTCLIENT" ] && install_osmclient track osmclient osmclient_ok echo -e "Checking OSM health state..." $OSM_DEVOPS/installers/osm_health.sh -s ${OSM_STACK_NAME} -k || \ (echo -e "OSM is not healthy, but will probably converge to a healthy state soon." && \ echo -e "Check OSM status with: kubectl -n ${OSM_STACK_NAME} get all" && \ track healthchecks osm_unhealthy didnotconverge) track healthchecks after_healthcheck_ok add_local_k8scluster track final_ops add_local_k8scluster_ok wget -q -O- https://osm-download.etsi.org/ftp/osm-12.0-twelve/README2.txt &> /dev/null track end sudo find /etc/osm [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function return 0 } function install_to_openstack() { [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function if [ -z "$2" ]; then FATAL "OpenStack installer requires a valid external network name" fi # Install Pip for Python3 sudo apt install -y python3-pip python3-venv sudo -H LC_ALL=C python3 -m pip install -U pip # Create a venv to avoid conflicts with the host installation python3 -m venv $OPENSTACK_PYTHON_VENV source $OPENSTACK_PYTHON_VENV/bin/activate # Install Ansible, OpenStack client and SDK, latest openstack version supported is Train python -m pip install -U wheel python -m pip install -U "python-openstackclient<=4.0.2" "openstacksdk>=0.12.0,<=0.36.2" "ansible>=2.10,<2.11" # Install the Openstack cloud module (ansible>=2.10) ansible-galaxy collection install openstack.cloud export ANSIBLE_CONFIG="$OSM_DEVOPS/installers/openstack/ansible.cfg" OSM_INSTALLER_ARGS="${REPO_ARGS[@]}" ANSIBLE_VARS="external_network_name=$2 setup_volume=$3 server_name=$OPENSTACK_VM_NAME" if [ -n "$OPENSTACK_SSH_KEY_FILE" ]; then ANSIBLE_VARS+=" key_file=$OPENSTACK_SSH_KEY_FILE" fi if [ -n "$OPENSTACK_USERDATA_FILE" ]; then ANSIBLE_VARS+=" userdata_file=$OPENSTACK_USERDATA_FILE" fi # Execute the Ansible playbook based on openrc or clouds.yaml if [ -e "$1" ]; then . $1 ansible-playbook -e installer_args="\"$OSM_INSTALLER_ARGS\"" -e "$ANSIBLE_VARS" \ $OSM_DEVOPS/installers/openstack/site.yml else ansible-playbook -e installer_args="\"$OSM_INSTALLER_ARGS\"" -e "$ANSIBLE_VARS" \ -e cloud_name=$1 $OSM_DEVOPS/installers/openstack/site.yml fi # Exit from venv deactivate [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function return 0 } function install_k8s_monitoring() { [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function # install OSM monitoring sudo chmod +x $OSM_DEVOPS/installers/k8s/*.sh sudo $OSM_DEVOPS/installers/k8s/install_osm_k8s_monitoring.sh || FATAL_TRACK install_k8s_monitoring "k8s/install_osm_k8s_monitoring.sh failed" [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function } function dump_vars(){ [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function echo "APT_PROXY_URL=$APT_PROXY_URL" echo "DEVELOP=$DEVELOP" echo "DEBUG_INSTALL=$DEBUG_INSTALL" echo "DOCKER_NOBUILD=$DOCKER_NOBUILD" echo "DOCKER_PROXY_URL=$DOCKER_PROXY_URL" echo "DOCKER_REGISTRY_URL=$DOCKER_REGISTRY_URL" echo "DOCKER_USER=$DOCKER_USER" echo "INSTALL_CACHELXDIMAGES=$INSTALL_CACHELXDIMAGES" echo "INSTALL_FROM_SOURCE=$INSTALL_FROM_SOURCE" echo "INSTALL_K8S_MONITOR=$INSTALL_K8S_MONITOR" echo "INSTALL_LIGHTWEIGHT=$INSTALL_LIGHTWEIGHT" echo "INSTALL_LXD=$INSTALL_LXD" echo "INSTALL_NODOCKER=$INSTALL_NODOCKER" echo "INSTALL_NOJUJU=$INSTALL_NOJUJU" echo "INSTALL_NOLXD=$INSTALL_NOLXD" echo "INSTALL_ONLY=$INSTALL_ONLY" echo "INSTALL_PLA=$INSTALL_PLA" echo "INSTALL_TO_OPENSTACK=$INSTALL_TO_OPENSTACK" echo "INSTALL_VIMEMU=$INSTALL_VIMEMU" echo "NO_HOST_PORTS=$NO_HOST_PORTS" echo "OPENSTACK_PUBLIC_NET_NAME=$OPENSTACK_PUBLIC_NET_NAME" echo "OPENSTACK_OPENRC_FILE_OR_CLOUD=$OPENSTACK_OPENRC_FILE_OR_CLOUD" echo "OPENSTACK_ATTACH_VOLUME=$OPENSTACK_ATTACH_VOLUME" echo "OPENSTACK_SSH_KEY_FILE"="$OPENSTACK_SSH_KEY_FILE" echo "OPENSTACK_USERDATA_FILE"="$OPENSTACK_USERDATA_FILE" echo "OPENSTACK_VM_NAME"="$OPENSTACK_VM_NAME" echo "OSM_DEVOPS=$OSM_DEVOPS" echo "OSM_DOCKER_TAG=$OSM_DOCKER_TAG" echo "OSM_DOCKER_WORK_DIR=$OSM_DOCKER_WORK_DIR" echo "OSM_K8S_WORK_DIR=$OSM_K8S_WORK_DIR" echo "OSM_STACK_NAME=$OSM_STACK_NAME" echo "OSM_VCA_HOST=$OSM_VCA_HOST" echo "OSM_VCA_PUBKEY=$OSM_VCA_PUBKEY" echo "OSM_VCA_SECRET=$OSM_VCA_SECRET" echo "OSM_WORK_DIR=$OSM_WORK_DIR" echo "PULL_IMAGES=$PULL_IMAGES" echo "RECONFIGURE=$RECONFIGURE" echo "RELEASE=$RELEASE" echo "REPOSITORY=$REPOSITORY" echo "REPOSITORY_BASE=$REPOSITORY_BASE" echo "REPOSITORY_KEY=$REPOSITORY_KEY" echo "SHOWOPTS=$SHOWOPTS" echo "TEST_INSTALLER=$TEST_INSTALLER" echo "TO_REBUILD=$TO_REBUILD" echo "UNINSTALL=$UNINSTALL" echo "UPDATE=$UPDATE" echo "Install from specific refspec (-b): $COMMIT_ID" [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function } function parse_docker_registry_url() { [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function DOCKER_REGISTRY_USER=$(echo "$DOCKER_REGISTRY_URL" | awk '{split($1,a,"@"); split(a[1],b,":"); print b[1]}') DOCKER_REGISTRY_PASSWORD=$(echo "$DOCKER_REGISTRY_URL" | awk '{split($1,a,"@"); split(a[1],b,":"); print b[2]}') DOCKER_REGISTRY_URL=$(echo "$DOCKER_REGISTRY_URL" | awk '{split($1,a,"@"); print a[2]}') [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function } function ctrl_c() { [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function echo "** Trapped CTRL-C" FATAL "User stopped the installation" [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function } LXD_VERSION=5.0 JUJU_VERSION=2.9 JUJU_AGENT_VERSION=2.9.29 UNINSTALL="" DEVELOP="" UPDATE="" RECONFIGURE="" TEST_INSTALLER="" INSTALL_LXD="" SHOWOPTS="" COMMIT_ID="" ASSUME_YES="" APT_PROXY_URL="" INSTALL_FROM_SOURCE="" DEBUG_INSTALL="" RELEASE="ReleaseTEN" REPOSITORY="stable" INSTALL_VIMEMU="" INSTALL_PLA="" LXD_REPOSITORY_BASE="https://osm-download.etsi.org/repository/osm/lxd" LXD_REPOSITORY_PATH="" INSTALL_LIGHTWEIGHT="y" INSTALL_TO_OPENSTACK="" OPENSTACK_OPENRC_FILE_OR_CLOUD="" OPENSTACK_PUBLIC_NET_NAME="" OPENSTACK_ATTACH_VOLUME="false" OPENSTACK_SSH_KEY_FILE="" OPENSTACK_USERDATA_FILE="" OPENSTACK_VM_NAME="server-osm" OPENSTACK_PYTHON_VENV="$HOME/.virtual-envs/osm" INSTALL_ONLY="" TO_REBUILD="" INSTALL_NOLXD="" INSTALL_NODOCKER="" INSTALL_NOJUJU="" INSTALL_K8S_MONITOR="" INSTALL_NOHOSTCLIENT="" INSTALL_CACHELXDIMAGES="" OSM_DEVOPS= OSM_VCA_HOST= OSM_VCA_SECRET= OSM_VCA_PUBKEY= OSM_VCA_CLOUDNAME="localhost" OSM_VCA_K8S_CLOUDNAME="k8scloud" OSM_STACK_NAME=osm NO_HOST_PORTS="" DOCKER_NOBUILD="" REPOSITORY_KEY="OSM%20ETSI%20Release%20Key.gpg" REPOSITORY_BASE="https://osm-download.etsi.org/repository/osm/debian" OSM_WORK_DIR="/etc/osm" OSM_DOCKER_WORK_DIR="/etc/osm/docker" OSM_K8S_WORK_DIR="${OSM_DOCKER_WORK_DIR}/osm_pods" OSM_HOST_VOL="/var/lib/osm" OSM_NAMESPACE_VOL="${OSM_HOST_VOL}/${OSM_STACK_NAME}" OSM_DOCKER_TAG=latest DOCKER_USER=opensourcemano PULL_IMAGES="y" KAFKA_TAG=2.11-1.0.2 KIWIGRID_K8S_SIDECAR_TAG="1.15.6" PROMETHEUS_TAG=v2.28.1 GRAFANA_TAG=8.1.1 PROMETHEUS_NODE_EXPORTER_TAG=0.18.1 PROMETHEUS_CADVISOR_TAG=latest KEYSTONEDB_TAG=10 OSM_DATABASE_COMMONKEY= ELASTIC_VERSION=6.4.2 ELASTIC_CURATOR_VERSION=5.5.4 POD_NETWORK_CIDR=10.244.0.0/16 K8S_MANIFEST_DIR="/etc/kubernetes/manifests" RE_CHECK='^[a-z0-9]([-a-z0-9]*[a-z0-9])?$' DOCKER_REGISTRY_URL= DOCKER_PROXY_URL= MODULE_DOCKER_TAG= OSM_INSTALLATION_TYPE="Default" while getopts ":a:b:r:n:k:u:R:D:o:O:m:N:H:S:s:t:U:P:A:l:L:K:d:p:T:f:F:-: hy" o; do case "${o}" in a) APT_PROXY_URL=${OPTARG} ;; b) COMMIT_ID=${OPTARG} PULL_IMAGES="" ;; r) REPOSITORY="${OPTARG}" REPO_ARGS+=(-r "$REPOSITORY") ;; k) REPOSITORY_KEY="${OPTARG}" REPO_ARGS+=(-k "$REPOSITORY_KEY") ;; u) REPOSITORY_BASE="${OPTARG}" REPO_ARGS+=(-u "$REPOSITORY_BASE") ;; R) RELEASE="${OPTARG}" REPO_ARGS+=(-R "$RELEASE") ;; D) OSM_DEVOPS="${OPTARG}" ;; o) INSTALL_ONLY="y" [ "${OPTARG}" == "k8s_monitor" ] && INSTALL_K8S_MONITOR="y" && continue ;; O) INSTALL_TO_OPENSTACK="y" if [ -n "${OPTARG}" ]; then OPENSTACK_OPENRC_FILE_OR_CLOUD="${OPTARG}" else echo -e "Invalid argument for -O : ' $OPTARG'\n" >&2 usage && exit 1 fi ;; f) OPENSTACK_SSH_KEY_FILE="${OPTARG}" ;; F) OPENSTACK_USERDATA_FILE="${OPTARG}" ;; N) OPENSTACK_PUBLIC_NET_NAME="${OPTARG}" ;; m) [ "${OPTARG}" == "NG-UI" ] && TO_REBUILD="$TO_REBUILD NG-UI" && continue [ "${OPTARG}" == "NBI" ] && TO_REBUILD="$TO_REBUILD NBI" && continue [ "${OPTARG}" == "LCM" ] && TO_REBUILD="$TO_REBUILD LCM" && continue [ "${OPTARG}" == "RO" ] && TO_REBUILD="$TO_REBUILD RO" && continue [ "${OPTARG}" == "MON" ] && TO_REBUILD="$TO_REBUILD MON" && continue [ "${OPTARG}" == "POL" ] && TO_REBUILD="$TO_REBUILD POL" && continue [ "${OPTARG}" == "PLA" ] && TO_REBUILD="$TO_REBUILD PLA" && continue [ "${OPTARG}" == "osmclient" ] && TO_REBUILD="$TO_REBUILD osmclient" && continue [ "${OPTARG}" == "KAFKA" ] && TO_REBUILD="$TO_REBUILD KAFKA" && continue [ "${OPTARG}" == "MONGO" ] && TO_REBUILD="$TO_REBUILD MONGO" && continue [ "${OPTARG}" == "PROMETHEUS" ] && TO_REBUILD="$TO_REBUILD PROMETHEUS" && continue [ "${OPTARG}" == "PROMETHEUS-CADVISOR" ] && TO_REBUILD="$TO_REBUILD PROMETHEUS-CADVISOR" && continue [ "${OPTARG}" == "KEYSTONE-DB" ] && TO_REBUILD="$TO_REBUILD KEYSTONE-DB" && continue [ "${OPTARG}" == "GRAFANA" ] && TO_REBUILD="$TO_REBUILD GRAFANA" && continue [ "${OPTARG}" == "NONE" ] && TO_REBUILD="$TO_REBUILD NONE" && continue ;; H) OSM_VCA_HOST="${OPTARG}" ;; S) OSM_VCA_SECRET="${OPTARG}" ;; s) OSM_STACK_NAME="${OPTARG}" && [[ ! "${OPTARG}" =~ $RE_CHECK ]] && echo "Namespace $OPTARG is invalid. Regex used for validation is $RE_CHECK" && exit 0 ;; t) OSM_DOCKER_TAG="${OPTARG}" REPO_ARGS+=(-t "$OSM_DOCKER_TAG") ;; U) DOCKER_USER="${OPTARG}" ;; P) OSM_VCA_PUBKEY=$(cat ${OPTARG}) ;; A) OSM_VCA_APIPROXY="${OPTARG}" ;; l) LXD_CLOUD_FILE="${OPTARG}" ;; L) LXD_CRED_FILE="${OPTARG}" ;; K) CONTROLLER_NAME="${OPTARG}" ;; d) DOCKER_REGISTRY_URL="${OPTARG}" ;; p) DOCKER_PROXY_URL="${OPTARG}" ;; T) MODULE_DOCKER_TAG="${OPTARG}" ;; -) [ "${OPTARG}" == "help" ] && usage && exit 0 [ "${OPTARG}" == "source" ] && INSTALL_FROM_SOURCE="y" && PULL_IMAGES="" && continue [ "${OPTARG}" == "debug" ] && DEBUG_INSTALL="--debug" && continue [ "${OPTARG}" == "develop" ] && DEVELOP="y" && continue [ "${OPTARG}" == "uninstall" ] && UNINSTALL="y" && continue [ "${OPTARG}" == "update" ] && UPDATE="y" && continue [ "${OPTARG}" == "reconfigure" ] && RECONFIGURE="y" && continue [ "${OPTARG}" == "test" ] && TEST_INSTALLER="y" && continue [ "${OPTARG}" == "lxdinstall" ] && INSTALL_LXD="y" && continue [ "${OPTARG}" == "nolxd" ] && INSTALL_NOLXD="y" && continue [ "${OPTARG}" == "nodocker" ] && INSTALL_NODOCKER="y" && continue [ "${OPTARG}" == "showopts" ] && SHOWOPTS="y" && continue [ "${OPTARG}" == "nohostports" ] && NO_HOST_PORTS="y" && continue [ "${OPTARG}" == "nojuju" ] && INSTALL_NOJUJU="--nojuju" && continue [ "${OPTARG}" == "nodockerbuild" ] && DOCKER_NOBUILD="y" && continue [ "${OPTARG}" == "nohostclient" ] && INSTALL_NOHOSTCLIENT="y" && continue [ "${OPTARG}" == "pullimages" ] && continue [ "${OPTARG}" == "k8s_monitor" ] && INSTALL_K8S_MONITOR="y" && continue [ "${OPTARG}" == "charmed" ] && CHARMED="y" && OSM_INSTALLATION_TYPE="Charmed" && continue [ "${OPTARG}" == "bundle" ] && continue [ "${OPTARG}" == "k8s" ] && continue [ "${OPTARG}" == "lxd" ] && continue [ "${OPTARG}" == "lxd-cred" ] && continue [ "${OPTARG}" == "microstack" ] && continue [ "${OPTARG}" == "overlay" ] && continue [ "${OPTARG}" == "only-vca" ] && continue [ "${OPTARG}" == "small-profile" ] && continue [ "${OPTARG}" == "vca" ] && continue [ "${OPTARG}" == "ha" ] && continue [ "${OPTARG}" == "tag" ] && continue [ "${OPTARG}" == "registry" ] && continue [ "${OPTARG}" == "pla" ] && INSTALL_PLA="y" && continue [ "${OPTARG}" == "volume" ] && OPENSTACK_ATTACH_VOLUME="true" && continue [ "${OPTARG}" == "nocachelxdimages" ] && continue [ "${OPTARG}" == "cachelxdimages" ] && INSTALL_CACHELXDIMAGES="--cachelxdimages" && continue echo -e "Invalid option: '--$OPTARG'\n" >&2 usage && exit 1 ;; :) echo "Option -$OPTARG requires an argument" >&2 usage && exit 1 ;; \?) echo -e "Invalid option: '-$OPTARG'\n" >&2 usage && exit 1 ;; h) usage && exit 0 ;; y) ASSUME_YES="y" ;; *) usage && exit 1 ;; esac done source $OSM_DEVOPS/common/all_funcs [ -z "${DEBUG_INSTALL}" ] || DEBUG Debug is on [ -n "$SHOWOPTS" ] && dump_vars && exit 0 # Uninstall if "--uninstall" if [ -n "$UNINSTALL" ]; then if [ -n "$CHARMED" ]; then ${OSM_DEVOPS}/installers/charmed_uninstall.sh -R $RELEASE -r $REPOSITORY -u $REPOSITORY_BASE -D $OSM_DEVOPS -t $DOCKER_TAG "$@" || \ FATAL_TRACK charmed_uninstall "charmed_uninstall.sh failed" else ${OSM_DEVOPS}/installers/uninstall_osm.sh "$@" || \ FATAL_TRACK community_uninstall "uninstall_osm.sh failed" fi echo -e "\nDONE" exit 0 fi # Charmed installation if [ -n "$CHARMED" ]; then export OSM_TRACK_INSTALLATION_ID="$(date +%s)-$(head /dev/urandom | tr -dc A-Za-z0-9 | head -c 16)" track start release $RELEASE none none docker_tag $OSM_DOCKER_TAG none none installation_type $OSM_INSTALLATION_TYPE none none ${OSM_DEVOPS}/installers/charmed_install.sh --tag $OSM_DOCKER_TAG "$@" || \ FATAL_TRACK charmed_install "charmed_install.sh failed" wget -q -O- https://osm-download.etsi.org/ftp/osm-12.0-twelve/README2.txt &> /dev/null track end installation_type $OSM_INSTALLATION_TYPE echo -e "\nDONE" exit 0 fi # Installation to Openstack if [ -n "$INSTALL_TO_OPENSTACK" ]; then install_to_openstack $OPENSTACK_OPENRC_FILE_OR_CLOUD $OPENSTACK_PUBLIC_NET_NAME $OPENSTACK_ATTACH_VOLUME echo -e "\nDONE" exit 0 fi # Community_installer [ -n "$DOCKER_REGISTRY_URL" ] && parse_docker_registry_url [ -n "$TO_REBUILD" ] && [ "$TO_REBUILD" != " NONE" ] && echo $TO_REBUILD | grep -q NONE && FATAL "Incompatible option: -m NONE cannot be used with other -m options" [ -n "$TO_REBUILD" ] && [ "$TO_REBUILD" == " PLA" ] && [ -z "$INSTALL_PLA" ] && FATAL "Incompatible option: -m PLA cannot be used without --pla option" # if develop, we force master [ -z "$COMMIT_ID" ] && [ -n "$DEVELOP" ] && COMMIT_ID="master" check_packages "git wget curl tar snapd" sudo snap install jq if [ -z "$OSM_DEVOPS" ]; then if [ -n "$TEST_INSTALLER" ]; then echo -e "\nUsing local devops repo for OSM installation" OSM_DEVOPS="$(dirname $(realpath $(dirname $0)))" else echo -e "\nCreating temporary dir for OSM installation" OSM_DEVOPS="$(mktemp -d -q --tmpdir "installosm.XXXXXX")" trap 'rm -rf "$OSM_DEVOPS"' EXIT git clone https://osm.etsi.org/gerrit/osm/devops.git $OSM_DEVOPS if [ -z "$COMMIT_ID" ]; then echo -e "\nGuessing the current stable release" LATEST_STABLE_DEVOPS=`git -C $OSM_DEVOPS tag -l v[0-9].* | sort -V | tail -n1` [ -z "$LATEST_STABLE_DEVOPS" ] && echo "Could not find the current latest stable release" && exit 0 echo "Latest tag in devops repo: $LATEST_STABLE_DEVOPS" COMMIT_ID="tags/$LATEST_STABLE_DEVOPS" else echo -e "\nDEVOPS Using commit $COMMIT_ID" fi git -C $OSM_DEVOPS checkout $COMMIT_ID fi fi [ "${OSM_STACK_NAME}" == "osm" ] || OSM_DOCKER_WORK_DIR="$OSM_WORK_DIR/stack/$OSM_STACK_NAME" OSM_K8S_WORK_DIR="$OSM_DOCKER_WORK_DIR/osm_pods" && OSM_NAMESPACE_VOL="${OSM_HOST_VOL}/${OSM_STACK_NAME}" [ -n "$INSTALL_ONLY" ] && [ -n "$INSTALL_K8S_MONITOR" ] && install_k8s_monitoring [ -n "$INSTALL_ONLY" ] && echo -e "\nDONE" && exit 0 #Installation starts here wget -q -O- https://osm-download.etsi.org/ftp/osm-12.0-twelve/README.txt &> /dev/null export OSM_TRACK_INSTALLATION_ID="$(date +%s)-$(head /dev/urandom | tr -dc A-Za-z0-9 | head -c 16)" install_osm echo -e "\nDONE" exit 0