#!/bin/bash
#   Copyright 2016 Telefónica Investigación y Desarrollo S.A.U.
#
#   Licensed under the Apache License, Version 2.0 (the "License");
#   you may not use this file except in compliance with the License.
#   You may obtain a copy of the License at
#
#       http://www.apache.org/licenses/LICENSE-2.0
#
#   Unless required by applicable law or agreed to in writing, software
#   distributed under the License is distributed on an "AS IS" BASIS,
#   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
#   See the License for the specific language governing permissions and
#   limitations under the License.

function usage(){
    echo -e "usage: $0 [OPTIONS]"
    echo -e "Install OSM from binaries or source code (by default, from binaries)"
    echo -e "  OPTIONS"
    echo -e "     -r <repo>:      use specified repository name for osm packages"
    echo -e "     -R <release>:   use specified release for osm binaries (deb packages, lxd images, ...)"
    echo -e "     -u <repo base>: use specified repository url for osm packages"
    echo -e "     -k <repo key>:  use specified repository public key url"
    echo -e "     -b <refspec>:   install OSM from source code using a specific branch (master, v2.0, ...) or tag"
    echo -e "                     -b master          (main dev branch)"
    echo -e "                     -b v2.0            (v2.0 branch)"
    echo -e "                     -b tags/v1.1.0     (a specific tag)"
    echo -e "                     ..."
    echo -e "     --vimemu:       additionally deploy the VIM emulator as a docker container"
    echo -e "     --elk_stack:    additionally deploy an ELK docker stack for event logging"
    echo -e "     --pm_stack:     additionally deploy a Prometheus+Grafana stack for performance monitoring (PM)"
    echo -e "     -m <MODULE>:    install OSM but only rebuild the specified docker images (RO, LCM, NBI, LW-UI, MON, KAFKA, MONGO, NONE)"
    echo -e "     -o <ADDON>:     do not install OSM, but ONLY one of the addons (vimemu, elk_stack, pm_stack) (assumes OSM is already installed)"
    echo -e "     -D <devops path> use local devops installation path"
    echo -e "     --nolxd:        do not install and configure LXD, allowing unattended installations (assumes LXD is already installed and confifured)"
    echo -e "     --nodocker:     do not install docker, do not initialize a swarm (assumes docker is already installed and a swarm has been initialized)"
    echo -e "     --uninstall:    uninstall OSM: remove the containers and delete NAT rules"
    echo -e "     --source:       install OSM from source code using the latest stable tag"
    echo -e "     --develop:      (deprecated, use '-b master') install OSM from source code using the master branch"
    echo -e "     --soui:         install classic build of OSM (Rel THREE v3.1, based on LXD containers, with SO and UI)"
    echo -e "     --lxdimages:    (only for Rel THREE with --soui) download lxd images from OSM repository instead of creating them from scratch"
    echo -e "     -l <lxd_repo>:  (only for Rel THREE with --soui) use specified repository url for lxd images"
    echo -e "     -p <path>:      (only for Rel THREE with --soui) use specified repository path for lxd images"
#    echo -e "     --reconfigure:  reconfigure the modules (DO NOT change NAT rules)"
    echo -e "     --nat:          (only for Rel THREE with --soui) install only NAT rules"
    echo -e "     --noconfigure:  (only for Rel THREE with --soui) DO NOT install osmclient, DO NOT install NAT rules, DO NOT configure modules"
#    echo -e "     --update:       update to the latest stable release or to the latest commit if using a specific branch"
    echo -e "     --showopts:     print chosen options and exit (only for debugging)"
    echo -e "     -y:             do not prompt for confirmation, assumes yes"
    echo -e "     -h / --help:    print this help"
}

#Uninstall OSM: remove containers
function uninstall(){
    echo -e "\nUninstalling OSM"
    if [ $RC_CLONE ] || [ -n "$TEST_INSTALLER" ]; then
        $OSM_DEVOPS/jenkins/host/clean_container RO
        $OSM_DEVOPS/jenkins/host/clean_container VCA
        $OSM_DEVOPS/jenkins/host/clean_container MON
        $OSM_DEVOPS/jenkins/host/clean_container SO
        #$OSM_DEVOPS/jenkins/host/clean_container UI
    else
        lxc stop RO && lxc delete RO
        lxc stop VCA && lxc delete VCA
        lxc stop MON && lxc delete MON
        lxc stop SO-ub && lxc delete SO-ub
    fi
    echo -e "\nDeleting imported lxd images if they exist"
    lxc image show osm-ro &>/dev/null && lxc image delete osm-ro
    lxc image show osm-vca &>/dev/null && lxc image delete osm-vca
    lxc image show osm-soui &>/dev/null && lxc image delete osm-soui
    return 0
}

function remove_stack() {
    stack=$1
    if sg docker -c "docker stack ps ${stack}" ; then
        echo -e "\nRemoving stack ${stack}" && sg docker -c "docker stack rm ${stack}"
        COUNTER=0
        result=1
        while [ ${COUNTER} -lt 30 ]; do
            result=$(sg docker -c "docker stack ps ${stack}" | wc -l)
            #echo "Dockers running: $result"
            if [ "${result}" == "0" ]; then
                break
            fi
            let COUNTER=COUNTER+1
            sleep 1
        done
        if [ "${result}" == "0" ]; then
            echo "All dockers of the stack ${stack} were removed"
        else
            FATAL "Some dockers of the stack ${stack} could not be removed. Could not clean it."
        fi
        sleep 5
    fi
}

#Uninstall lightweight OSM: remove dockers
function uninstall_lightweight() {
    echo -e "\nUninstalling lightweight OSM"
    remove_stack osm
    echo "Now osm docker images and volumes will be deleted"
    newgrp docker << EONG
    docker image rm osm/ro
    docker image rm osm/lcm
    docker image rm osm/light-ui
    docker image rm osm/nbi
    docker image rm osm/mon
    docker image rm osm/pm
    docker volume rm osm_mon_db
    docker volume rm osm_mongo_db
    docker volume rm osm_osm_packages
    docker volume rm osm_ro_db
EONG
    echo "Removing /etc/osm and /var/log/osm files"
    rm -rf /etc/osm
    rm -rf /var/log/osm
    return 0
}

#Configure NAT rules, based on the current IP addresses of containers
function nat(){
    echo -e "\nChecking required packages: iptables-persistent"
    dpkg -l iptables-persistent &>/dev/null || ! echo -e "    Not installed.\nInstalling iptables-persistent requires root privileges" || \
    sudo DEBIAN_FRONTEND=noninteractive apt-get -yq install iptables-persistent
    echo -e "\nConfiguring NAT rules"
    echo -e "   Required root privileges"
    sudo $OSM_DEVOPS/installers/nat_osm
}

function FATAL(){
    echo "FATAL error: Cannot install OSM due to \"$1\""
    exit 1
}

#Update RO, SO and UI:
function update(){
    echo -e "\nUpdating components"

    echo -e "     Updating RO"
    CONTAINER="RO"
    MDG="RO"
    INSTALL_FOLDER="/opt/openmano"
    echo -e "     Fetching the repo"
    lxc exec $CONTAINER -- git -C $INSTALL_FOLDER fetch --all
    BRANCH=""
    BRANCH=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER status -sb | head -n1 | sed -n 's/^## \(.*\).*/\1/p'|awk '{print $1}' |sed 's/\(.*\)\.\.\..*/\1/'`
    [ -z "$BRANCH" ] && FATAL "Could not find the current branch in use in the '$MDG'"
    CURRENT=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER status |head -n1`
    CURRENT_COMMIT_ID=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-parse HEAD`
    echo "         FROM: $CURRENT ($CURRENT_COMMIT_ID)"
    # COMMIT_ID either was  previously set with -b option, or is an empty string
    CHECKOUT_ID=$COMMIT_ID
    [ -z "$CHECKOUT_ID" ] && [ "$BRANCH" == "HEAD" ] && CHECKOUT_ID="tags/$LATEST_STABLE_DEVOPS"
    [ -z "$CHECKOUT_ID" ] && [ "$BRANCH" != "HEAD" ] && CHECKOUT_ID="$BRANCH"
    if [[ $CHECKOUT_ID == "tags/"* ]]; then
        REMOTE_COMMIT_ID=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-list -n 1 $CHECKOUT_ID`
    else
        REMOTE_COMMIT_ID=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-parse origin/$CHECKOUT_ID`
    fi
    echo "         TO: $CHECKOUT_ID ($REMOTE_COMMIT_ID)"
    if [ "$CURRENT_COMMIT_ID" == "$REMOTE_COMMIT_ID" ]; then
        echo "         Nothing to be done."
    else
        echo "         Update required."
        lxc exec $CONTAINER -- service osm-ro stop
        lxc exec $CONTAINER -- git -C /opt/openmano stash
        lxc exec $CONTAINER -- git -C /opt/openmano pull --rebase
        lxc exec $CONTAINER -- git -C /opt/openmano checkout $CHECKOUT_ID
        lxc exec $CONTAINER -- git -C /opt/openmano stash pop
        lxc exec $CONTAINER -- /opt/openmano/database_utils/migrate_mano_db.sh
        lxc exec $CONTAINER -- service osm-ro start
    fi
    echo

    echo -e "     Updating SO and UI"
    CONTAINER="SO-ub"
    MDG="SO"
    INSTALL_FOLDER=""   # To be filled in
    echo -e "     Fetching the repo"
    lxc exec $CONTAINER -- git -C $INSTALL_FOLDER fetch --all
    BRANCH=""
    BRANCH=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER status -sb | head -n1 | sed -n 's/^## \(.*\).*/\1/p'|awk '{print $1}' |sed 's/\(.*\)\.\.\..*/\1/'`
    [ -z "$BRANCH" ] && FATAL "Could not find the current branch in use in the '$MDG'"
    CURRENT=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER status |head -n1`
    CURRENT_COMMIT_ID=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-parse HEAD`
    echo "         FROM: $CURRENT ($CURRENT_COMMIT_ID)"
    # COMMIT_ID either was  previously set with -b option, or is an empty string
    CHECKOUT_ID=$COMMIT_ID
    [ -z "$CHECKOUT_ID" ] && [ "$BRANCH" == "HEAD" ] && CHECKOUT_ID="tags/$LATEST_STABLE_DEVOPS"
    [ -z "$CHECKOUT_ID" ] && [ "$BRANCH" != "HEAD" ] && CHECKOUT_ID="$BRANCH"
    if [[ $CHECKOUT_ID == "tags/"* ]]; then
        REMOTE_COMMIT_ID=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-list -n 1 $CHECKOUT_ID`
    else
        REMOTE_COMMIT_ID=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-parse origin/$CHECKOUT_ID`
    fi
    echo "         TO: $CHECKOUT_ID ($REMOTE_COMMIT_ID)"
    if [ "$CURRENT_COMMIT_ID" == "$REMOTE_COMMIT_ID" ]; then
        echo "         Nothing to be done."
    else
        echo "         Update required."
        # Instructions to be added
        # lxc exec SO-ub -- ...
    fi
    echo
    echo -e "Updating MON Container"
    CONTAINER="MON"
    MDG="MON"
    INSTALL_FOLDER="/root/MON"
    echo -e "     Fetching the repo"
    lxc exec $CONTAINER -- git -C $INSTALL_FOLDER fetch --all
    BRANCH=""
    BRANCH=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER status -sb | head -n1 | sed -n 's/^## \(.*\).*/\1/p'|awk '{print $1}' |sed 's/\(.*\)\.\.\..*/\1/'`
    [ -z "$BRANCH" ] && FATAL "Could not find the current branch in use in the '$MDG'"
    CURRENT=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER status |head -n1`
    CURRENT_COMMIT_ID=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-parse HEAD`
    echo "         FROM: $CURRENT ($CURRENT_COMMIT_ID)"
    # COMMIT_ID either was  previously set with -b option, or is an empty string
    CHECKOUT_ID=$COMMIT_ID
    [ -z "$CHECKOUT_ID" ] && [ "$BRANCH" == "HEAD" ] && CHECKOUT_ID="tags/$LATEST_STABLE_DEVOPS"
    [ -z "$CHECKOUT_ID" ] && [ "$BRANCH" != "HEAD" ] && CHECKOUT_ID="$BRANCH"
    if [[ $CHECKOUT_ID == "tags/"* ]]; then
        REMOTE_COMMIT_ID=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-list -n 1 $CHECKOUT_ID`
    else
        REMOTE_COMMIT_ID=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-parse origin/$CHECKOUT_ID`
    fi
    echo "         TO: $CHECKOUT_ID ($REMOTE_COMMIT_ID)"
    if [ "$CURRENT_COMMIT_ID" == "$REMOTE_COMMIT_ID" ]; then
        echo "         Nothing to be done."
    else
        echo "         Update required."
    fi
    echo
}

function so_is_up() {
    if [ -n "$1" ]; then
        SO_IP=$1
    else
        SO_IP=`lxc list SO-ub -c 4|grep eth0 |awk '{print $2}'`
    fi
    time=0
    step=5
    timelength=300
    while [ $time -le $timelength ]
    do
        if [[ `curl -k -X GET   https://$SO_IP:8008/api/operational/vcs/info \
                -H 'accept: application/vnd.yang.data+json' \
                -H 'authorization: Basic YWRtaW46YWRtaW4=' \
                -H 'cache-control: no-cache' 2> /dev/null | jq  '.[].components.component_info[] | select(.component_name=="RW.Restconf")' 2>/dev/null | grep "RUNNING" | wc -l` -eq 1 ]]
        then
            echo "RW.Restconf running....SO is up"
            return 0
        fi

        sleep $step
        echo -n "."
        time=$((time+step))
    done

    FATAL "OSM Failed to startup. SO failed to startup"
}

function vca_is_up() {
    if [[ `lxc exec VCA -- juju status | grep "osm" | wc -l` -eq 1 ]]; then
            echo "VCA is up and running"
            return 0
    fi

    FATAL "OSM Failed to startup. VCA failed to startup"
}

function mon_is_up() {
    if [[ `curl http://$RO_IP:9090/openmano/ | grep "works" | wc -l` -eq 1 ]]; then
            echo "MON is up and running"
            return 0
    fi

    FATAL "OSM Failed to startup. MON failed to startup"
}

function ro_is_up() {
    if [ -n "$1" ]; then
        RO_IP=$1
    else
        RO_IP=`lxc list RO -c 4|grep eth0 |awk '{print $2}'`
    fi
    time=0
    step=2
    timelength=20
    while [ $time -le $timelength ]; do
        if [[ `curl http://$RO_IP:9090/openmano/ | grep "works" | wc -l` -eq 1 ]]; then
            echo "RO is up and running"
            return 0
        fi
        sleep $step
        echo -n "."
        time=$((time+step))
    done

    FATAL "OSM Failed to startup. RO failed to startup"
}


function configure_RO(){
    . $OSM_DEVOPS/installers/export_ips
    echo -e "       Configuring RO"
    lxc exec RO -- sed -i -e "s/^\#\?log_socket_host:.*/log_socket_host: $SO_CONTAINER_IP/g" /etc/osm/openmanod.cfg
    lxc exec RO -- service osm-ro restart

    ro_is_up

    lxc exec RO -- openmano tenant-delete -f osm >/dev/null
    lxc exec RO -- openmano tenant-create osm > /dev/null
    lxc exec RO -- sed -i '/export OPENMANO_TENANT=osm/d' .bashrc
    lxc exec RO -- sed -i '$ i export OPENMANO_TENANT=osm' .bashrc
    lxc exec RO -- sh -c 'echo "export OPENMANO_TENANT=osm" >> .bashrc'
}

function configure_VCA(){
    echo -e "       Configuring VCA"
    JUJU_PASSWD=`date +%s | sha256sum | base64 | head -c 32`
    echo -e "$JUJU_PASSWD\n$JUJU_PASSWD" | lxc exec VCA -- juju change-user-password
}

function configure_SOUI(){
    . $OSM_DEVOPS/installers/export_ips
    JUJU_CONTROLLER_IP=`lxc exec VCA -- lxc list -c 4 |grep eth0 |awk '{print $2}'`
    RO_TENANT_ID=`lxc exec RO -- openmano tenant-list osm |awk '{print $1}'`

    echo -e " Configuring MON"
    #Information to be added about SO socket for logging

    echo -e "       Configuring SO"
    sudo route add -host $JUJU_CONTROLLER_IP gw $VCA_CONTAINER_IP
    sudo ip route add 10.44.127.0/24 via $VCA_CONTAINER_IP
    sudo sed -i "$ i route add -host $JUJU_CONTROLLER_IP gw $VCA_CONTAINER_IP" /etc/rc.local
    sudo sed -i "$ i ip route add 10.44.127.0/24 via $VCA_CONTAINER_IP" /etc/rc.local
    # make journaling persistent
    lxc exec SO-ub -- mkdir -p /var/log/journal
    lxc exec SO-ub -- systemd-tmpfiles --create --prefix /var/log/journal
    lxc exec SO-ub -- systemctl restart systemd-journald

    echo RIFT_EXTERNAL_ADDRESS=$DEFAULT_IP | lxc exec SO-ub -- tee -a /usr/rift/etc/default/launchpad

    lxc exec SO-ub -- systemctl restart launchpad

    so_is_up $SO_CONTAINER_IP

    #delete existing config agent (could be there on reconfigure)
    curl -k --request DELETE \
      --url https://$SO_CONTAINER_IP:8008/api/config/config-agent/account/osmjuju \
      --header 'accept: application/vnd.yang.data+json' \
      --header 'authorization: Basic YWRtaW46YWRtaW4=' \
      --header 'cache-control: no-cache' \
      --header 'content-type: application/vnd.yang.data+json' &> /dev/null

    result=$(curl -k --request POST \
      --url https://$SO_CONTAINER_IP:8008/api/config/config-agent \
      --header 'accept: application/vnd.yang.data+json' \
      --header 'authorization: Basic YWRtaW46YWRtaW4=' \
      --header 'cache-control: no-cache' \
      --header 'content-type: application/vnd.yang.data+json' \
      --data '{"account": [ { "name": "osmjuju", "account-type": "juju", "juju": { "ip-address": "'$JUJU_CONTROLLER_IP'", "port": "17070", "user": "admin", "secret": "'$JUJU_PASSWD'" }  }  ]}')
    [[ $result =~ .*success.* ]] || FATAL "Failed config-agent configuration: $result"

    #R1/R2 config line
    #result=$(curl -k --request PUT \
    #  --url https://$SO_CONTAINER_IP:8008/api/config/resource-orchestrator \
    #  --header 'accept: application/vnd.yang.data+json' \
    #  --header 'authorization: Basic YWRtaW46YWRtaW4=' \
    #  --header 'cache-control: no-cache' \
    #  --header 'content-type: application/vnd.yang.data+json' \
    #  --data '{ "openmano": { "host": "'$RO_CONTAINER_IP'", "port": "9090", "tenant-id": "'$RO_TENANT_ID'" }, "name": "osmopenmano", "account-type": "openmano" }')

    result=$(curl -k --request PUT \
      --url https://$SO_CONTAINER_IP:8008/api/config/project/default/ro-account/account \
      --header 'accept: application/vnd.yang.data+json' \
      --header 'authorization: Basic YWRtaW46YWRtaW4=' \
      --header 'cache-control: no-cache'   \
      --header 'content-type: application/vnd.yang.data+json' \
      --data '{"rw-ro-account:account": [ { "openmano": { "host": "'$RO_CONTAINER_IP'", "port": "9090", "tenant-id": "'$RO_TENANT_ID'"}, "name": "osmopenmano", "ro-account-type": "openmano" }]}')
    [[ $result =~ .*success.* ]] || FATAL "Failed resource-orchestrator configuration: $result"

    result=$(curl -k --request PATCH \
      --url https://$SO_CONTAINER_IP:8008/v2/api/config/openidc-provider-config/rw-ui-client/redirect-uri \
      --header 'accept: application/vnd.yang.data+json' \
      --header 'authorization: Basic YWRtaW46YWRtaW4=' \
      --header 'cache-control: no-cache'   \
      --header 'content-type: application/vnd.yang.data+json' \
      --data '{"redirect-uri": "https://'$DEFAULT_IP':8443/callback" }')
    [[ $result =~ .*success.* ]] || FATAL "Failed redirect-uri configuration: $result"

    result=$(curl -k --request PATCH \
      --url https://$SO_CONTAINER_IP:8008/v2/api/config/openidc-provider-config/rw-ui-client/post-logout-redirect-uri \
      --header 'accept: application/vnd.yang.data+json' \
      --header 'authorization: Basic YWRtaW46YWRtaW4=' \
      --header 'cache-control: no-cache'   \
      --header 'content-type: application/vnd.yang.data+json' \
      --data '{"post-logout-redirect-uri": "https://'$DEFAULT_IP':8443/?api_server=https://'$DEFAULT_IP'" }')
    [[ $result =~ .*success.* ]] || FATAL "Failed post-logout-redirect-uri configuration: $result"

    lxc exec SO-ub -- tee /etc/network/interfaces.d/60-rift.cfg <<EOF
auto lo:1
iface lo:1 inet static
        address  $DEFAULT_IP
        netmask 255.255.255.255
EOF
    lxc exec SO-ub ifup lo:1
}

#Configure RO, VCA, and SO with the initial configuration:
#  RO -> tenant:osm, logs to be sent to SO
#  VCA -> juju-password
#  SO -> route to Juju Controller, add RO account, add VCA account
function configure(){
    #Configure components
    echo -e "\nConfiguring components"
    configure_RO
    configure_VCA
    configure_SOUI
}

function install_lxd() {
    sudo apt-get update
    sudo apt-get install -y lxd
    newgrp lxd
    lxd init --auto
    lxd waitready
    lxc network create lxdbr0 ipv4.address=auto ipv4.nat=true ipv6.address=none ipv6.nat=false
    DEFAULT_INTERFACE=$(route -n | awk '$1~/^0.0.0.0/ {print $8}')
    DEFAULT_MTU=$(ip addr show $DEFAULT_INTERFACE | perl -ne 'if (/mtu\s(\d+)/) {print $1;}')
    lxc profile device set default eth0 mtu $DEFAULT_MTU
    #sudo systemctl stop lxd-bridge
    #sudo systemctl --system daemon-reload
    #sudo systemctl enable lxd-bridge
    #sudo systemctl start lxd-bridge
}

function ask_user(){
    # ask to the user and parse a response among 'y', 'yes', 'n' or 'no'. Case insensitive
    # Params: $1 text to ask;   $2 Action by default, can be 'y' for yes, 'n' for no, other or empty for not allowed
    # Return: true(0) if user type 'yes'; false (1) if user type 'no'
    read -e -p "$1" USER_CONFIRMATION
    while true ; do
        [ -z "$USER_CONFIRMATION" ] && [ "$2" == 'y' ] && return 0
        [ -z "$USER_CONFIRMATION" ] && [ "$2" == 'n' ] && return 1
        [ "${USER_CONFIRMATION,,}" == "yes" ] || [ "${USER_CONFIRMATION,,}" == "y" ] && return 0
        [ "${USER_CONFIRMATION,,}" == "no" ]  || [ "${USER_CONFIRMATION,,}" == "n" ] && return 1
        read -e -p "Please type 'yes' or 'no': " USER_CONFIRMATION
    done
}

function launch_container_from_lxd(){
    export OSM_MDG=$1
    OSM_load_config
    export OSM_BASE_IMAGE=$2
    if ! container_exists $OSM_BUILD_CONTAINER; then
        CONTAINER_OPTS=""
        [[ "$OSM_BUILD_CONTAINER_PRIVILEGED" == yes ]] && CONTAINER_OPTS="$CONTAINER_OPTS -c security.privileged=true"
        [[ "$OSM_BUILD_CONTAINER_ALLOW_NESTED" == yes ]] && CONTAINER_OPTS="$CONTAINER_OPTS -c security.nesting=true"
        create_container $OSM_BASE_IMAGE $OSM_BUILD_CONTAINER $CONTAINER_OPTS
        wait_container_up $OSM_BUILD_CONTAINER
    fi
}

function install_osmclient(){
    CLIENT_RELEASE=${RELEASE#"-R "}
    CLIENT_REPOSITORY_KEY="OSM%20ETSI%20Release%20Key.gpg"
    CLIENT_REPOSITORY=${REPOSITORY#"-r "}
    [ -z "$REPOSITORY_BASE" ] && REPOSITORY_BASE="-u https://osm-download.etsi.org/repository/osm/debian"
    CLIENT_REPOSITORY_BASE=${REPOSITORY_BASE#"-u "}
    key_location=$CLIENT_REPOSITORY_BASE/$CLIENT_RELEASE/$CLIENT_REPOSITORY_KEY
    curl $key_location | sudo apt-key add -
    sudo add-apt-repository -y "deb [arch=amd64] $CLIENT_REPOSITORY_BASE/$CLIENT_RELEASE $CLIENT_REPOSITORY osmclient"
    sudo apt-get update
    sudo apt-get install -y python-pip
    sudo -H pip install pip==9.0.3
    sudo -H pip install python-magic
    sudo apt-get install -y python-osmclient
    #sed 's,OSM_SOL005=[^$]*,OSM_SOL005=True,' -i ${HOME}/.bashrc
    #echo 'export OSM_HOSTNAME=localhost' >> ${HOME}/.bashrc
    #echo 'export OSM_SOL005=True' >> ${HOME}/.bashrc
    [ -z "$INSTALL_LIGHTWEIGHT" ] && export OSM_HOSTNAME=`lxc list | awk '($2=="SO-ub"){print $6}'`
    [ -z "$INSTALL_LIGHTWEIGHT" ] && export OSM_RO_HOSTNAME=`lxc list | awk '($2=="RO"){print $6}'`
    [ -n "$INSTALL_LIGHTWEIGHT" ] && export OSM_HOSTNAME=127.0.0.1
    echo -e "\nOSM client installed"
    echo -e "You might be interested in adding the following OSM client env variables to your .bashrc file:"
    echo "     export OSM_HOSTNAME=${OSM_HOSTNAME}"
    [ -n "$INSTALL_LIGHTWEIGHT" ] && echo "     export OSM_SOL005=True"
    [ -z "$INSTALL_LIGHTWEIGHT" ] && echo "     export OSM_RO_HOSTNAME=${OSM_RO_HOSTNAME}"
    return 0
}

function install_from_lxdimages(){
    LXD_RELEASE=${RELEASE#"-R "}
    if [ -n "$LXD_REPOSITORY_PATH" ]; then
        LXD_IMAGE_DIR="$LXD_REPOSITORY_PATH"
    else
        LXD_IMAGE_DIR="$(mktemp -d -q --tmpdir "osmimages.XXXXXX")"
        trap 'rm -rf "$LXD_IMAGE_DIR"' EXIT
    fi
    echo -e "\nDeleting previous lxd images if they exist"
    lxc image show osm-ro &>/dev/null && lxc image delete osm-ro
    lxc image show osm-vca &>/dev/null && lxc image delete osm-vca
    lxc image show osm-soui &>/dev/null && lxc image delete osm-soui
    echo -e "\nImporting osm-ro"
    [ -z "$LXD_REPOSITORY_PATH" ] && wget -O $LXD_IMAGE_DIR/osm-ro.tar.gz $LXD_REPOSITORY_BASE/$LXD_RELEASE/osm-ro.tar.gz
    lxc image import $LXD_IMAGE_DIR/osm-ro.tar.gz --alias osm-ro
    rm -f $LXD_IMAGE_DIR/osm-ro.tar.gz
    echo -e "\nImporting osm-vca"
    [ -z "$LXD_REPOSITORY_PATH" ] && wget -O $LXD_IMAGE_DIR/osm-vca.tar.gz $LXD_REPOSITORY_BASE/$LXD_RELEASE/osm-vca.tar.gz
    lxc image import $LXD_IMAGE_DIR/osm-vca.tar.gz --alias osm-vca
    rm -f $LXD_IMAGE_DIR/osm-vca.tar.gz
    echo -e "\nImporting osm-soui"
    [ -z "$LXD_REPOSITORY_PATH" ] && wget -O $LXD_IMAGE_DIR/osm-soui.tar.gz $LXD_REPOSITORY_BASE/$LXD_RELEASE/osm-soui.tar.gz
    lxc image import $LXD_IMAGE_DIR/osm-soui.tar.gz --alias osm-soui
    rm -f $LXD_IMAGE_DIR/osm-soui.tar.gz
    launch_container_from_lxd RO osm-ro
    ro_is_up && track RO
    launch_container_from_lxd VCA osm-vca
    vca_is_up && track VCA
    launch_container_from_lxd MON osm-mon
    mon_is_up && track MON
    launch_container_from_lxd SO osm-soui
    #so_is_up && track SOUI
    track SOUI
}

function install_docker_ce() {
    # installs and configures Docker CE
    echo "Installing Docker CE ..."
    sudo apt-get -qq update
    sudo apt-get install -y apt-transport-https ca-certificates software-properties-common
    curl -fsSL https://download.docker.com/linux/ubuntu/gpg | sudo apt-key add -
    sudo add-apt-repository "deb [arch=amd64] https://download.docker.com/linux/ubuntu $(lsb_release -cs) stable"
    sudo apt-get -qq update
    sudo apt-get install -y docker-ce
    echo "Adding user to group 'docker'"
    sudo groupadd -f docker
    sudo usermod -aG docker $USER
    sleep 2
    sudo service docker restart
    echo "... restarted Docker service"
    sg docker -c "docker version" || FATAL "Docker installation failed"
    echo "... Docker CE installation done"
    return 0
}

function install_docker_compose() {
    # installs and configures docker-compose
    echo "Installing Docker Compose ..."
    sudo curl -L https://github.com/docker/compose/releases/download/1.18.0/docker-compose-`uname -s`-`uname -m` -o /usr/local/bin/docker-compose
    sudo chmod +x /usr/local/bin/docker-compose
    echo "... Docker Compose installation done"
}

function install_juju() {
    echo "Installing juju"
    sudo snap install juju --classic
    [ -z "$INSTALL_NOLXD" ] && sudo dpkg-reconfigure -p medium lxd
    sg lxd -c "juju bootstrap --bootstrap-series=xenial localhost osm"
    [ $(sg lxd -c "juju status" |grep "osm" |wc -l) -eq 1 ] || FATAL "Juju installation failed"
    echo "Finished installation of juju"
}

function generate_docker_images() {
    echo "Pulling and generating docker images"
    if [ -z "$TO_REBUILD" ] || echo $TO_REBUILD | grep -q KAFKA ; then
        sg docker -c "docker pull wurstmeister/zookeeper" || FATAL "cannot get zookeeper docker image"
        sg docker -c "docker pull wurstmeister/kafka" || FATAL "cannot get kafka docker image"
    fi
    if [ -z "$TO_REBUILD" ] || echo $TO_REBUILD | grep -q MONGO ; then
        sg docker -c "docker pull mongo" || FATAL "cannot get mongo docker image"
    fi
    if [ -z "$TO_REBUILD" ] || echo $TO_REBUILD | grep -q MON ; then
        git -C ${LWTEMPDIR} clone https://osm.etsi.org/gerrit/osm/MON
        git -C ${LWTEMPDIR}/MON checkout ${COMMIT_ID}
        sg docker -c "docker build ${LWTEMPDIR}/MON -f ${LWTEMPDIR}/MON/docker/Dockerfile -t osm/mon --no-cache" || FATAL "cannot build MON docker image"
        sg docker -c "docker build ${LWTEMPDIR}/MON/policy_module -f ${LWTEMPDIR}/MON/policy_module/Dockerfile -t osm/pm --no-cache" || FATAL "cannot build PM docker image"
    fi
    if [ -z "$TO_REBUILD" ] || echo $TO_REBUILD | grep -q NBI ; then
        git -C ${LWTEMPDIR} clone https://osm.etsi.org/gerrit/osm/NBI
        git -C ${LWTEMPDIR}/NBI checkout ${COMMIT_ID}
        sg docker -c "docker build ${LWTEMPDIR}/NBI -f ${LWTEMPDIR}/NBI/Dockerfile.local -t osm/nbi --no-cache" || FATAL "cannot build NBI docker image"
    fi
    if [ -z "$TO_REBUILD" ] || echo $TO_REBUILD | grep -q RO ; then
        sg docker -c "docker pull mysql:5" || FATAL "cannot get mysql docker image"
        git -C ${LWTEMPDIR} clone https://osm.etsi.org/gerrit/osm/RO
        git -C ${LWTEMPDIR}/RO checkout ${COMMIT_ID}
        sg docker -c "docker build ${LWTEMPDIR}/RO -f ${LWTEMPDIR}/RO/docker/Dockerfile-local -t osm/ro --no-cache" || FATAL "cannot build RO docker image"
    fi
    if [ -z "$TO_REBUILD" ] || echo $TO_REBUILD | grep -q LCM ; then
        git -C ${LWTEMPDIR} clone https://osm.etsi.org/gerrit/osm/LCM
        git -C ${LWTEMPDIR}/LCM checkout ${COMMIT_ID}
        sg docker -c "docker build ${LWTEMPDIR}/LCM -f ${LWTEMPDIR}/LCM/Dockerfile.local -t osm/lcm --no-cache" || FATAL "cannot build LCM docker image"
    fi
    if [ -z "$TO_REBUILD" ] || echo $TO_REBUILD | grep -q LW-UI ; then
        git -C ${LWTEMPDIR} clone https://osm.etsi.org/gerrit/osm/LW-UI
        git -C ${LWTEMPDIR}/LW-UI checkout ${COMMIT_ID}
        sg docker -c "docker build ${LWTEMPDIR}/LW-UI -t osm/light-ui -f ${LWTEMPDIR}/LW-UI/Dockerfile --no-cache" || FATAL "cannot build LW-UI docker image"
    fi
    echo "Finished generation of docker images"
}

function cmp_overwrite() {
    file1="$1"
    file2="$2"
    if ! $(cmp "${file1}" "${file2}" >/dev/null 2>&1); then
        if [ -f "${file2}" ]; then
            ask_user "The file ${file2} already exists. Overwrite (y/N)? " n && sudo cp -b ${file1} ${file2}
        else
            sudo cp -b ${file1} ${file2}
        fi
    fi
}

function generate_config_log_folders() {
    echo "Generating config and log folders"
    sudo mkdir -p /etc/osm/docker
    sudo cp -b ${OSM_DEVOPS}/installers/docker/docker-compose.yaml /etc/osm/docker/docker-compose.yaml
    sudo mkdir -p /var/log/osm
    echo "Finished generation of config and log folders"
}

function generate_docker_env_files() {
    echo "Generating docker env files"
    echo "OSMLCM_VCA_HOST=${OSMLCM_VCA_HOST}" |sudo tee /etc/osm/docker/lcm.env
    echo "OSMLCM_VCA_SECRET=${OSMLCM_VCA_SECRET}" |sudo tee -a /etc/osm/docker/lcm.env
    MYSQL_ROOT_PASSWORD=`date +%s | sha256sum | base64 | head -c 32`
    if [ ! -f /etc/osm/docker/ro-db.env ]; then
        echo "MYSQL_ROOT_PASSWORD=${MYSQL_ROOT_PASSWORD}" |sudo tee /etc/osm/docker/ro-db.env
    fi
    if [ ! -f /etc/osm/docker/ro.env ]; then
        echo "RO_DB_ROOT_PASSWORD=${MYSQL_ROOT_PASSWORD}" |sudo tee /etc/osm/docker/ro.env
    fi
    echo "OS_NOTIFIER_URI=http://${DEFAULT_IP}:8662" |sudo tee ${OSM_DEVOPS}/installers/docker/mon.env
    cmp_overwrite ${OSM_DEVOPS}/installers/docker/mon.env /etc/osm/docker/mon.env
    echo "Finished generation of docker env files"
}

function init_docker_swarm() {
    if [ "${DEFAULT_MTU}" != "1500" ]; then
      DOCKER_NETS=`sg docker -c "docker network list" | awk '{print $2}' | egrep -v "^ID$" | paste -d " " -s`
      DOCKER_GW_NET=`sg docker -c "docker network inspect ${DOCKER_NETS}" | grep Subnet | awk -F\" '{print $4}' | egrep "^172" | sort -u | tail -1 |  awk -F\. '{if ($2 != 255) print $1"."$2+1"."$3"."$4; else print "-1";}'`
      sg docker -c "docker network create --subnet ${DOCKER_GW_NET} --opt com.docker.network.bridge.name=docker_gwbridge --opt com.docker.network.bridge.enable_icc=false --opt com.docker.network.bridge.enable_ip_masquerade=true --opt com.docker.network.driver.mtu=${DEFAULT_MTU} docker_gwbridge"
    fi
    sg docker -c "docker swarm init --advertise-addr ${DEFAULT_IP}"
    sg docker -c "docker network create --driver=overlay --attachable --opt com.docker.network.driver.mtu=${DEFAULT_MTU} netOSM"
    return 0
}

function deploy_lightweight() {
    echo "Deploying lightweight build"
    [ -n "$INSTALL_NODOCKER" ] || init_docker_swarm
    remove_stack osm
    sg docker -c "docker stack deploy -c /etc/osm/docker/docker-compose.yaml osm"
    #docker-compose -f /etc/osm/docker/docker-compose.yaml up -d
    echo "Finished deployment of lightweight build"
}

function deploy_elk() {
    echo "Pulling docker images for ELK"
    sg docker -c "docker pull docker.elastic.co/elasticsearch/elasticsearch-oss:6.2.3" || FATAL "cannot get elasticsearch docker image"
    sg docker -c "docker pull docker.elastic.co/logstash/logstash-oss:6.2.3" || FATAL "cannot get logstash docker image"
    sg docker -c "docker pull docker.elastic.co/kibana/kibana-oss:6.2.3" || FATAL "cannot get kibana docker image"
    echo "Finished pulling elk docker images"
    sudo mkdir -p /etc/osm/docker/osm_elk
    sudo cp -b ${OSM_DEVOPS}/installers/docker/osm_elk/* /etc/osm/docker/osm_elk
    remove_stack osm_elk
    echo "Deploying ELK stack"
    sg docker -c "docker stack deploy -c /etc/osm/docker/osm_elk/docker-compose.yml osm_elk"
    echo "Waiting for ELK stack to be up and running"
    time=0
    step=5
    timelength=40
    elk_is_up=1
    while [ $time -le $timelength ]; do
        if [[ $(curl -f -XGET http://127.0.0.1:5601/status -I 2>/dev/null | grep "HTTP/1.1 200 OK" | wc -l ) -eq 1 ]]; then
            elk_is_up=0
            break
        fi
        sleep $step
        time=$((time+step))
    done
    if [ $elk_is_up -eq 0 ]; then
        echo "ELK is up and running. Trying to create index pattern..."
        #Create index pattern
        curl -f -XPOST -H "Content-Type: application/json" -H "kbn-xsrf: anything" \
          "http://127.0.0.1:5601/api/saved_objects/index-pattern/logstash-*" \
          -d"{\"attributes\":{\"title\":\"logstash-*\",\"timeFieldName\":\"@timestamp\"}}" 2>/dev/null
        #Make it the default index
        curl -f -XPOST -H "Content-Type: application/json" -H "kbn-xsrf: anything" \
          "http://127.0.0.1:5601/api/kibana/settings/defaultIndex" \
          -d"{\"value\":\"logstash-*\"}" 2>/dev/null
    else
        echo "Cannot connect to Kibana to create index pattern."
        echo "Once Kibana is running, you can use the following instructions to create index pattern:"
        echo 'curl -f -XPOST -H "Content-Type: application/json" -H "kbn-xsrf: anything" \
          "http://127.0.0.1:5601/api/saved_objects/index-pattern/logstash-*" \
          -d"{\"attributes\":{\"title\":\"logstash-*\",\"timeFieldName\":\"@timestamp\"}}"'
        echo 'curl -XPOST -H "Content-Type: application/json" -H "kbn-xsrf: anything" \
          "http://127.0.0.1:5601/api/kibana/settings/defaultIndex" \
          -d"{\"value\":\"logstash-*\"}"'
    fi
    echo "Finished deployment of ELK stack"
    return 0
}

function deploy_perfmon() {
    echo "Pulling docker images for PM (Grafana and Prometheus)"
    sg docker -c "docker pull prom/prometheus" || FATAL "cannot get prometheus docker image"
    sg docker -c "docker pull grafana/grafana" || FATAL "cannot get grafana docker image"
    echo "Finished pulling PM docker images"
    echo "Generating osm/kafka-exporter docker image"
    sg docker -c "docker build ${OSM_DEVOPS}/installers/docker/osm_metrics/kafka-exporter -f ${OSM_DEVOPS}/installers/docker/osm_metrics/kafka-exporter/Dockerfile -t osm/kafka-exporter --no-cache" || FATAL "cannot build kafka-exporter docker image"
    echo "Finished generation of osm/kafka-exporter docker image"
    sudo mkdir -p /etc/osm/docker/osm_metrics
    sudo cp -b ${OSM_DEVOPS}/installers/docker/osm_metrics/*.yml /etc/osm/docker/osm_metrics
    sudo cp -b ${OSM_DEVOPS}/installers/docker/osm_metrics/*.json /etc/osm/docker/osm_metrics
    remove_stack osm_metrics
    echo "Deploying PM stack (Kafka exporter + Prometheus + Grafana)"
    sg docker -c "docker stack deploy -c /etc/osm/docker/osm_metrics/docker-compose.yml osm_metrics"
    echo "Finished deployment of PM stack"
    return 0
}

function install_lightweight() {
    [ "$USER" == "root" ] && FATAL "You are running the installer as root. The installer is prepared to be executed as a normal user with sudo privileges."
    [ -z "$ASSUME_YES" ] && ! ask_user "The installation will configure LXD, install juju, install docker CE and init a docker swarm, as pre-requirements. Do you want to proceed (Y/n)? " y && echo "Cancelled!" && exit 1
    track proceed
    echo "Installing lightweight build of OSM"
    LWTEMPDIR="$(mktemp -d -q --tmpdir "installosmlight.XXXXXX")"
    trap 'rm -rf "${LWTEMPDIR}"' EXIT
    DEFAULT_IF=`route -n |awk '$1~/^0.0.0.0/ {print $8}'`
    [ -z "$DEFAULT_IF" ] && FATAL "Not possible to determine the interface with the default route 0.0.0.0"
    DEFAULT_IP=`ip -o -4 a |grep ${DEFAULT_IF}|awk '{split($4,a,"/"); print a[1]}'`
    [ -z "$DEFAULT_IP" ] && FATAL "Not possible to determine the IP address of the interface with the default route"
    DEFAULT_MTU=$(ip addr show ${DEFAULT_IF} | perl -ne 'if (/mtu\s(\d+)/) {print $1;}')
    if [ -z "$INSTALL_NOLXD" ]; then
        need_packages_lw="lxd"
        echo -e "Checking required packages: $need_packages_lw"
        dpkg -l $need_packages_lw &>/dev/null \
          || ! echo -e "One or several required packages are not installed. Updating apt cache requires root privileges." \
          || sudo apt-get update \
          || FATAL "failed to run apt-get update"
        dpkg -l $need_packages_lw &>/dev/null \
          || ! echo -e "Installing $need_packages_lw requires root privileges." \
          || sudo apt-get install -y $need_packages_lw \
          || FATAL "failed to install $need_packages_lw"
    fi
    track prereqok
    install_juju
    OSMLCM_VCA_HOST=`sg lxd -c "juju show-controller"|grep api-endpoints|awk -F\' '{print $2}'|awk -F\: '{print $1}'`
    OSMLCM_VCA_SECRET=`grep password ${HOME}/.local/share/juju/accounts.yaml |awk '{print $2}'`
    [ -z "$OSMLCM_VCA_HOST" ] && FATAL "Cannot obtain juju controller IP address"
    [ -z "$OSMLCM_VCA_SECRET" ] && FATAL "Cannot obtain juju secret"
    track juju
    [ -n "$INSTALL_NODOCKER" ] || install_docker_ce
    track docker_ce
    #install_docker_compose
    generate_docker_images
    track docker_build
    generate_config_log_folders
    generate_docker_env_files
    deploy_lightweight
    track docker_deploy
    [ -n "$INSTALL_VIMEMU" ] && install_vimemu && track vimemu
    [ -n "$INSTALL_ELK" ] && deploy_elk && track elk
    [ -n "$INSTALL_PERFMON" ] && deploy_perfmon && track perfmon
    install_osmclient
    track osmclient
    wget -q -O- https://osm-download.etsi.org/ftp/osm-4.0-four/README2.txt &> /dev/null
    track end
    return 0
}

function install_vimemu() {
    echo "\nInstalling vim-emu"
    EMUTEMPDIR="$(mktemp -d -q --tmpdir "installosmvimemu.XXXXXX")"
    trap 'rm -rf "${EMUTEMPDIR}"' EXIT
    # clone vim-emu repository (attention: branch is currently master only)
    echo "Cloning vim-emu repository ..."
    git clone https://osm.etsi.org/gerrit/osm/vim-emu.git $EMUTEMPDIR
    # build vim-emu docker
    echo "Building vim-emu Docker container..."
    sudo docker build -t vim-emu-img -f $EMUTEMPDIR/Dockerfile --no-cache $EMUTEMPDIR/ || FATAL "cannot build vim-emu-img docker image"
    # start vim-emu container as daemon
    echo "Starting vim-emu Docker container 'vim-emu' ..."
    if [ -n "$INSTALL_LIGHTWEIGHT" ]; then
        # in lightweight mode, the emulator needs to be attached to netOSM
        sudo docker run --name vim-emu -t -d --restart always --privileged --pid='host' --network=netOSM -v /var/run/docker.sock:/var/run/docker.sock vim-emu-img python examples/osm_default_daemon_topology_2_pop.py
    else
        # classic build mode
        sudo docker run --name vim-emu -t -d --restart always --privileged --pid='host' -v /var/run/docker.sock:/var/run/docker.sock vim-emu-img python examples/osm_default_daemon_topology_2_pop.py
    fi
    echo "Waiting for 'vim-emu' container to start ..."
    sleep 5
    export VIMEMU_HOSTNAME=$(sudo docker inspect -f '{{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}' vim-emu)
    echo "vim-emu running at ${VIMEMU_HOSTNAME} ..."
    # print vim-emu connection info
    echo -e "\nYou might be interested in adding the following vim-emu env variables to your .bashrc file:"
    echo "     export VIMEMU_HOSTNAME=${VIMEMU_HOSTNAME}"
    echo -e "To add the emulated VIM to OSM you should do:"
    echo "     osm vim-create --name emu-vim1 --user username --password password --auth_url http://${VIMEMU_HOSTNAME}:6001/v2.0 --tenant tenantName --account_type openstack"
}

function dump_vars(){
    echo "DEVELOP=$DEVELOP"
    echo "INSTALL_FROM_SOURCE=$INSTALL_FROM_SOURCE"
    echo "UNINSTALL=$UNINSTALL"
    echo "NAT=$NAT"
    echo "UPDATE=$UPDATE"
    echo "RECONFIGURE=$RECONFIGURE"
    echo "TEST_INSTALLER=$TEST_INSTALLER"
    echo "INSTALL_VIMEMU=$INSTALL_VIMEMU"
    echo "INSTALL_LXD=$INSTALL_LXD"
    echo "INSTALL_FROM_LXDIMAGES=$INSTALL_FROM_LXDIMAGES"
    echo "LXD_REPOSITORY_BASE=$LXD_REPOSITORY_BASE"
    echo "LXD_REPOSITORY_PATH=$LXD_REPOSITORY_PATH"
    echo "INSTALL_LIGHTWEIGHT=$INSTALL_LIGHTWEIGHT"
    echo "INSTALL_ONLY=$INSTALL_ONLY"
    echo "INSTALL_ELK=$INSTALL_ELK"
    echo "INSTALL_PERFMON=$INSTALL_PERFMON"
    echo "TO_REBUILD=$TO_REBUILD"
    echo "INSTALL_NOLXD=$INSTALL_NOLXD"
    echo "INSTALL_NODOCKER=$INSTALL_NODOCKER"
    echo "RELEASE=$RELEASE"
    echo "REPOSITORY=$REPOSITORY"
    echo "REPOSITORY_BASE=$REPOSITORY_BASE"
    echo "REPOSITORY_KEY=$REPOSITORY_KEY"
    echo "NOCONFIGURE=$NOCONFIGURE"
    echo "SHOWOPTS=$SHOWOPTS"
    echo "Install from specific refspec (-b): $COMMIT_ID"
}

function track(){
    ctime=`date +%s`
    duration=$((ctime - SESSION_ID))
    url="http://www.woopra.com/track/ce?project=osm.etsi.org&cookie=${SESSION_ID}"
    #url="${url}&ce_campaign_name=${CAMPAIGN_NAME}"
    event_name="bin"
    [ -z "$INSTALL_LIGHTWEIGHT" ] && [ -n "$INSTALL_FROM_SOURCE" ] && event_name="binsrc"
    [ -z "$INSTALL_LIGHTWEIGHT" ] && [ -n "$INSTALL_FROM_LXDIMAGES" ] && event_name="lxd"
    [ -n "$INSTALL_LIGHTWEIGHT" ] && event_name="lw"
    event_name="${event_name}_$1"
    url="${url}&event=${event_name}&ce_duration=${duration}"
    wget -q -O /dev/null $url
}

UNINSTALL=""
DEVELOP=""
NAT=""
UPDATE=""
RECONFIGURE=""
TEST_INSTALLER=""
INSTALL_LXD=""
SHOWOPTS=""
COMMIT_ID=""
ASSUME_YES=""
INSTALL_FROM_SOURCE=""
RELEASE="-R ReleaseFOUR"
REPOSITORY="-r stable"
INSTALL_VIMEMU=""
INSTALL_FROM_LXDIMAGES=""
LXD_REPOSITORY_BASE="https://osm-download.etsi.org/repository/osm/lxd"
LXD_REPOSITORY_PATH=""
INSTALL_LIGHTWEIGHT="y"
INSTALL_ONLY=""
INSTALL_ELK=""
INSTALL_PERFMON=""
TO_REBUILD=""
INSTALL_NOLXD=""
INSTALL_NODOCKER=""
NOCONFIGURE=""
RELEASE_DAILY=""
SESSION_ID=`date +%s`
OSM_DEVOPS=

while getopts ":hy-:b:r:k:u:R:l:p:D:o:m:" o; do
    case "${o}" in
        h)
            usage && exit 0
            ;;
        b)
            COMMIT_ID=${OPTARG}
            ;;
        r)
            REPOSITORY="-r ${OPTARG}"
            ;;
        R)
            RELEASE="-R ${OPTARG}"
            ;;
        k)
            REPOSITORY_KEY="-k ${OPTARG}"
            ;;
        u)
            REPOSITORY_BASE="-u ${OPTARG}"
            ;;
        l)
            LXD_REPOSITORY_BASE="${OPTARG}"
            ;;
        p)
            LXD_REPOSITORY_PATH="${OPTARG}"
            ;;
        D)
            OSM_DEVOPS="${OPTARG}"
            ;;
        o)
            INSTALL_ONLY="y"
            [ "${OPTARG}" == "vimemu" ] && INSTALL_VIMEMU="y" && continue
            [ "${OPTARG}" == "elk_stack" ] && INSTALL_ELK="y" && continue
            [ "${OPTARG}" == "pm_stack" ] && INSTALL_PERFMON="y" && continue
            ;;
        m)
            [ "${OPTARG}" == "RO" ] && TO_REBUILD="$TO_REBUILD RO" && continue
            [ "${OPTARG}" == "LCM" ] && TO_REBUILD="$TO_REBUILD LCM" && continue
            [ "${OPTARG}" == "NBI" ] && TO_REBUILD="$TO_REBUILD NBI" && continue
            [ "${OPTARG}" == "LW-UI" ] && TO_REBUILD="$TO_REBUILD LW-UI" && continue
            [ "${OPTARG}" == "MON" ] && TO_REBUILD="$TO_REBUILD MON" && continue
            [ "${OPTARG}" == "KAFKA" ] && TO_REBUILD="$TO_REBUILD KAFKA" && continue
            [ "${OPTARG}" == "MONGO" ] && TO_REBUILD="$TO_REBUILD MONGO" && continue
            [ "${OPTARG}" == "NONE" ] && TO_REBUILD="$TO_REBUILD NONE" && continue
            ;;
        -)
            [ "${OPTARG}" == "help" ] && usage && exit 0
            [ "${OPTARG}" == "source" ] && INSTALL_FROM_SOURCE="y" && continue
            [ "${OPTARG}" == "develop" ] && DEVELOP="y" && continue
            [ "${OPTARG}" == "uninstall" ] && UNINSTALL="y" && continue
            [ "${OPTARG}" == "nat" ] && NAT="y" && continue
            [ "${OPTARG}" == "update" ] && UPDATE="y" && continue
            [ "${OPTARG}" == "reconfigure" ] && RECONFIGURE="y" && continue
            [ "${OPTARG}" == "test" ] && TEST_INSTALLER="y" && continue
            [ "${OPTARG}" == "lxdinstall" ] && INSTALL_LXD="y" && continue
            [ "${OPTARG}" == "nolxd" ] && INSTALL_NOLXD="y" && continue
            [ "${OPTARG}" == "nodocker" ] && INSTALL_NODOCKER="y" && continue
            [ "${OPTARG}" == "lxdimages" ] && INSTALL_FROM_LXDIMAGES="y" && continue
            [ "${OPTARG}" == "lightweight" ] && INSTALL_LIGHTWEIGHT="y" && continue
            [ "${OPTARG}" == "soui" ] && INSTALL_LIGHTWEIGHT="" && RELEASE="-R ReleaseTHREE" && REPOSITORY="-r stable" && continue
            [ "${OPTARG}" == "vimemu" ] && INSTALL_VIMEMU="y" && continue
            [ "${OPTARG}" == "elk_stack" ] && INSTALL_ELK="y" && continue
            [ "${OPTARG}" == "pm_stack" ] && INSTALL_PERFMON="y" && continue
            [ "${OPTARG}" == "noconfigure" ] && NOCONFIGURE="y" && continue
            [ "${OPTARG}" == "showopts" ] && SHOWOPTS="y" && continue
            [ "${OPTARG}" == "daily" ] && RELEASE_DAILY="y" && continue
            echo -e "Invalid option: '--$OPTARG'\n" >&2
            usage && exit 1
            ;;
        \?)
            echo -e "Invalid option: '-$OPTARG'\n" >&2
            usage && exit 1
            ;;
        y)
            ASSUME_YES="y"
            ;;
        *)
            usage && exit 1
            ;;
    esac
done

[ -n "$INSTALL_FROM_LXDIMAGES" ] && [ -n "$INSTALL_LIGHTWEIGHT" ] && FATAL "Incompatible options: --lxd can only be used with --soui"
[ -n "$NAT" ] && [ -n "$INSTALL_LIGHTWEIGHT" ] && FATAL "Incompatible options: --nat can only be used with --soui"
[ -n "$NOCONFIGURE" ] && [ -n "$INSTALL_LIGHTWEIGHT" ] && FATAL "Incompatible options: --noconfigure can only be used with --soui"
[ -n "$RELEASE_DAILY" ] && [ -n "$INSTALL_LIGHTWEIGHT" ] && FATAL "Incompatible options: --daily can only be used with --soui"
[ -n "$INSTALL_NOLXD" ] && [ -z "$INSTALL_LIGHTWEIGHT" ] && FATAL "Incompatible option: --nolxd cannot be used with --soui"
[ -n "$INSTALL_NODOCKER" ] && [ -z "$INSTALL_LIGHTWEIGHT" ] && FATAL "Incompatible option: --nodocker cannot be used with --soui"
[ -n "$TO_REBUILD" ] && [ -z "$INSTALL_LIGHTWEIGHT" ] && FATAL "Incompatible option: -m cannot be used with --soui"
[ -n "$TO_REBUILD" ] && [ "$TO_REBUILD" != " NONE" ] && echo $TO_REBUILD | grep -q NONE && FATAL "Incompatible option: -m NONE cannot be used with other -m options"

if [ -n "$SHOWOPTS" ]; then
    dump_vars
    exit 0
fi

[ -n "$RELEASE_DAILY" ] && echo -e "\nInstalling from daily build repo" && RELEASE="-R ReleaseTHREE-daily" && REPOSITORY="-r testing" && COMMIT_ID="master"

# if develop, we force master
[ -z "$COMMIT_ID" ] && [ -n "$DEVELOP" ] && COMMIT_ID="master"

# forcing source from master removed. Now only install from source when explicit
# [ -n "$COMMIT_ID" ] && [ "$COMMIT_ID" == "master" ] && INSTALL_FROM_SOURCE="y"

if [ -z "$OSM_DEVOPS" ]; then
    if [ -n "$TEST_INSTALLER" ]; then
        echo -e "\nUsing local devops repo for OSM installation"
        TEMPDIR="$(dirname $(realpath $(dirname $0)))"
    else
        echo -e "\nCreating temporary dir for OSM installation"
        TEMPDIR="$(mktemp -d -q --tmpdir "installosm.XXXXXX")"
        trap 'rm -rf "$TEMPDIR"' EXIT
    fi
fi

need_packages="git jq wget curl tar"
echo -e "Checking required packages: $need_packages"
dpkg -l $need_packages &>/dev/null \
  || ! echo -e "One or several required packages are not installed. Updating apt cache requires root privileges." \
  || sudo apt-get update \
  || FATAL "failed to run apt-get update"
dpkg -l $need_packages &>/dev/null \
  || ! echo -e "Installing $need_packages requires root privileges." \
  || sudo apt-get install -y $need_packages \
  || FATAL "failed to install $need_packages"

if [ -z "$OSM_DEVOPS" ]; then
    if [ -z "$TEST_INSTALLER" ]; then
        echo -e "\nCloning devops repo temporarily"
        git clone https://osm.etsi.org/gerrit/osm/devops.git $TEMPDIR
        RC_CLONE=$?
    fi

    echo -e "\nGuessing the current stable release"
    LATEST_STABLE_DEVOPS=`git -C $TEMPDIR tag -l v[0-9].* | sort -V | tail -n1`
    [ -z "$COMMIT_ID" ] && [ -z "$LATEST_STABLE_DEVOPS" ] && echo "Could not find the current latest stable release" && exit 0
    echo "Latest tag in devops repo: $LATEST_STABLE_DEVOPS"
    [ -z "$COMMIT_ID" ] && [ -n "$LATEST_STABLE_DEVOPS" ] && COMMIT_ID="tags/$LATEST_STABLE_DEVOPS"

    if [ -n "$RELEASE_DAILY" ]; then
        echo "Using master/HEAD devops"
        git -C $TEMPDIR checkout master
    elif [ -z "$TEST_INSTALLER" ]; then
        git -C $TEMPDIR checkout tags/$LATEST_STABLE_DEVOPS
    fi
    OSM_DEVOPS=$TEMPDIR
fi

OSM_JENKINS="$OSM_DEVOPS/jenkins"
. $OSM_JENKINS/common/all_funcs

[ -n "$INSTALL_LIGHTWEIGHT" ] && [ -n "$UNINSTALL" ] && uninstall_lightweight && echo -e "\nDONE" && exit 0
[ -n "$UNINSTALL" ] && uninstall && echo -e "\nDONE" && exit 0
[ -n "$NAT" ] && nat && echo -e "\nDONE" && exit 0
[ -n "$UPDATE" ] && update && echo -e "\nDONE" && exit 0
[ -n "$RECONFIGURE" ] && configure && echo -e "\nDONE" && exit 0
[ -n "$INSTALL_ONLY" ] && [ -n "$INSTALL_ELK" ] && deploy_elk
[ -n "$INSTALL_ONLY" ] && [ -n "$INSTALL_PERFMON" ] && deploy_perfmon
[ -n "$INSTALL_ONLY" ] && [ -n "$INSTALL_VIMEMU" ] && install_vimemu
[ -n "$INSTALL_ONLY" ] && echo -e "\nDONE" && exit 0

#Installation starts here
wget -q -O- https://osm-download.etsi.org/ftp/osm-4.0-four/README.txt &> /dev/null
track start

[ -n "$INSTALL_LIGHTWEIGHT" ] && install_lightweight && echo -e "\nDONE" && exit 0
echo -e "\nInstalling OSM from refspec: $COMMIT_ID"
if [ -n "$INSTALL_FROM_SOURCE" ] && [ -z "$ASSUME_YES" ]; then
    ! ask_user "The installation will take about 75-90 minutes. Continue (Y/n)? " y && echo "Cancelled!" && exit 1
fi

echo -e "Checking required packages: lxd"
lxd --version &>/dev/null || FATAL "lxd not present, exiting."
[ -n "$INSTALL_LXD" ] && echo -e "\nInstalling and configuring lxd" && install_lxd

# use local devops for containers
export OSM_USE_LOCAL_DEVOPS=true
if [ -n "$INSTALL_FROM_SOURCE" ]; then #install from source
    echo -e "\nCreating the containers and building from source ..."
    $OSM_DEVOPS/jenkins/host/start_build RO --notest checkout $COMMIT_ID || FATAL "RO container build failed (refspec: '$COMMIT_ID')"
    ro_is_up && track RO
    $OSM_DEVOPS/jenkins/host/start_build VCA || FATAL "VCA container build failed"
    vca_is_up && track VCA
    $OSM_DEVOPS/jenkins/host/start_build MON || FATAL "MON install failed"
    mon_is_up && track MON
    $OSM_DEVOPS/jenkins/host/start_build SO checkout $COMMIT_ID || FATAL "SO container build failed (refspec: '$COMMIT_ID')"
    $OSM_DEVOPS/jenkins/host/start_build UI checkout $COMMIT_ID || FATAL "UI container build failed (refspec: '$COMMIT_ID')"
    #so_is_up && track SOUI
    track SOUI
elif [ -n "$INSTALL_FROM_LXDIMAGES" ]; then #install from LXD images stored in OSM repo
    echo -e "\nInstalling from lxd images ..."
    install_from_lxdimages
else #install from binaries
    echo -e "\nCreating the containers and installing from binaries ..."
    $OSM_DEVOPS/jenkins/host/install RO $REPOSITORY $RELEASE $REPOSITORY_KEY $REPOSITORY_BASE || FATAL "RO install failed"
    ro_is_up && track RO
    $OSM_DEVOPS/jenkins/host/start_build VCA || FATAL "VCA install failed"
    vca_is_up && track VCA
    $OSM_DEVOPS/jenkins/host/install MON || FATAL "MON build failed"
    mon_is_up && track MON
    $OSM_DEVOPS/jenkins/host/install SO $REPOSITORY $RELEASE $REPOSITORY_KEY $REPOSITORY_BASE || FATAL "SO install failed"
    $OSM_DEVOPS/jenkins/host/install UI $REPOSITORY $RELEASE $REPOSITORY_KEY $REPOSITORY_BASE || FATAL "UI install failed"
    #so_is_up && track SOUI
    track SOUI
fi

#Install iptables-persistent and configure NAT rules
[ -z "$NOCONFIGURE" ] && nat

#Configure components
[ -z "$NOCONFIGURE" ] && configure

#Install osmclient
[ -z "$NOCONFIGURE" ] && install_osmclient

#Install vim-emu (optional)
[ -n "$INSTALL_VIMEMU" ] && install_docker_ce && install_vimemu

wget -q -O- https://osm-download.etsi.org/ftp/osm-4.0-four/README2.txt &> /dev/null
track end
echo -e "\nDONE"