Merge branch 'v2.0'
Signed-off-by: velandy <rajesh.velandy@riftio.com>
diff --git a/charms/layers/sshproxy/.gitignore b/charms/layers/sshproxy/.gitignore
deleted file mode 100644
index b8e7ba3..0000000
--- a/charms/layers/sshproxy/.gitignore
+++ /dev/null
@@ -1 +0,0 @@
-trusty/
diff --git a/charms/layers/sshproxy/README.md b/charms/layers/sshproxy/README.md
deleted file mode 100644
index c66ff75..0000000
--- a/charms/layers/sshproxy/README.md
+++ /dev/null
@@ -1,97 +0,0 @@
-# Overview
-
-This is a [Juju] layer intended to ease the development of charms that need
-to execute commands over SSH, such as proxy charms.
-
-# What is a proxy charm?
-
-A proxy charm is a limited type of charm that does not interact with software running on the same host, such as controlling and configuring a remote device (a static VM image, a router/switch, etc.). It cannot take advantage of some of Juju's key features, such as [scaling], [relations], and [leadership].
-
-Proxy charms are primarily a stop-gap, intended to prototype quickly, with the end goal being to develop it into a full-featured charm, which installs and executes code on the same machine as the charm is running.
-
-# Integration
-
-After you've [created your charm], open `interfaces.yaml` and add
-`layer:sshproxy` to the includes stanza, as shown below:
-```
-includes: ['layer:basic', 'layer:sshproxy']
-```
-
-## Reactive states
-
-This layer will set the following states:
-
-- `sshproxy.configured` This state is set when SSH credentials have been supplied to the charm.
-
-
-## Example
-In `reactive/mycharm.py`, you can add logic to execute commands over SSH. This
-example is run via a `start` action, and starts a service running on a remote
-host.
-```
-...
-import charms.sshproxy
-
-
-@when('sshproxy.configured')
-@when('actions.start')
-def start():
- """ Execute's the command, via the start action` using the
- configured SSH credentials
- """
- sshproxy.ssh("service myservice start")
-
-```
-
-## Actions
-This layer includes a built-in `run` action useful for debugging or running arbitrary commands:
-
-```
-$ juju run-action mycharm/0 run command=hostname
-Action queued with id: 014b72f3-bc02-4ecb-8d38-72bce03bbb63
-
-$ juju show-action-output 014b72f3-bc02-4ecb-8d38-72bce03bbb63
-results:
- output: juju-66a5f3-11
-status: completed
-timing:
- completed: 2016-10-27 19:53:49 +0000 UTC
- enqueued: 2016-10-27 19:53:44 +0000 UTC
- started: 2016-10-27 19:53:48 +0000 UTC
-
-```
-## Known Limitations and Issues
-
-### Security issues
-
-- Password and key-based authentications are supported, with the caveat that
-both (password and private key) are stored plaintext within the Juju controller.
-
-# Configuration and Usage
-
-This layer adds the following configuration options:
-- ssh-hostname
-- ssh-username
-- ssh-password
-- ssh-private-key
-
-Once [configure] those values at any time. Once they are set, the `sshproxy.configured` state flag will be toggled:
-
-```
-juju deploy mycharm ssh-hostname=10.10.10.10 ssh-username=ubuntu ssh-password=yourpassword
-```
-or
-```
-juju deploy mycharm ssh-hostname=10.10.10.10 ssh-username=ubuntu ssh-private-key="`cat ~/.ssh/id_rsa`"
-```
-
-
-# Contact Information
-Homepage: https://github.com/AdamIsrael/layer-sshproxy
-
-[Juju]: https://jujucharms.com/about
-[configure]: https://jujucharms.com/docs/2.0/charms-config
-[scaling]: https://jujucharms.com/docs/2.0/charms-scaling
-[relations]: https://jujucharms.com/docs/2.0/charms-relations
-[leadership]: https://jujucharms.com/docs/2.0/developer-leadership
-[created your charm]: https://jujucharms.com/docs/2.0/developer-getting-started
diff --git a/charms/layers/sshproxy/actions.yaml b/charms/layers/sshproxy/actions.yaml
deleted file mode 100644
index 501b2f9..0000000
--- a/charms/layers/sshproxy/actions.yaml
+++ /dev/null
@@ -1,26 +0,0 @@
-##
-# Copyright 2016 Canonical Ltd.
-# All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License"); you may
-# not use this file except in compliance with the License. You may obtain
-# a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-# License for the specific language governing permissions and limitations
-# under the License.
-##
-
-run:
- description: "Run an arbitrary command"
- params:
- command:
- description: "The command to execute."
- type: string
- default: ""
- required:
- - command
diff --git a/charms/layers/sshproxy/actions/run b/charms/layers/sshproxy/actions/run
deleted file mode 100755
index d85d3fa..0000000
--- a/charms/layers/sshproxy/actions/run
+++ /dev/null
@@ -1,34 +0,0 @@
-#!/usr/bin/env python3
-##
-# Copyright 2016 Canonical Ltd.
-# All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License"); you may
-# not use this file except in compliance with the License. You may obtain
-# a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-# License for the specific language governing permissions and limitations
-# under the License.
-##
-import sys
-sys.path.append('lib')
-
-from charms.reactive import main
-from charms.reactive import set_state
-from charmhelpers.core.hookenv import action_fail, action_name
-
-"""
-`set_state` only works here because it's flushed to disk inside the `main()`
-loop. remove_state will need to be called inside the action method.
-"""
-set_state('actions.{}'.format(action_name()))
-
-try:
- main()
-except Exception as e:
- action_fail(repr(e))
diff --git a/charms/layers/sshproxy/config.yaml b/charms/layers/sshproxy/config.yaml
deleted file mode 100644
index 07f3756..0000000
--- a/charms/layers/sshproxy/config.yaml
+++ /dev/null
@@ -1,34 +0,0 @@
-##
-# Copyright 2016 Canonical Ltd.
-# All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License"); you may
-# not use this file except in compliance with the License. You may obtain
-# a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-# License for the specific language governing permissions and limitations
-# under the License.
-##
-
-options:
- ssh-hostname:
- type: string
- default: ""
- description: "The hostname or IP address of the machine to"
- ssh-username:
- type: string
- default: ""
- description: "The username to login as."
- ssh-password:
- type: string
- default: ""
- description: "The password used to authenticate."
- ssh-private-key:
- type: string
- default: ""
- description: "The private ssh key to be used to authenticate."
diff --git a/charms/layers/sshproxy/layer.yaml b/charms/layers/sshproxy/layer.yaml
deleted file mode 100644
index 4f095a6..0000000
--- a/charms/layers/sshproxy/layer.yaml
+++ /dev/null
@@ -1,18 +0,0 @@
-##
-# Copyright 2016 Canonical Ltd.
-# All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License"); you may
-# not use this file except in compliance with the License. You may obtain
-# a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-# License for the specific language governing permissions and limitations
-# under the License.
-##
-
-includes: ['layer:basic'] # if you use any interfaces, add them here
diff --git a/charms/layers/sshproxy/lib/charms/sshproxy.py b/charms/layers/sshproxy/lib/charms/sshproxy.py
deleted file mode 100644
index b247bcf..0000000
--- a/charms/layers/sshproxy/lib/charms/sshproxy.py
+++ /dev/null
@@ -1,124 +0,0 @@
-##
-# Copyright 2016 Canonical Ltd.
-# All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License"); you may
-# not use this file except in compliance with the License. You may obtain
-# a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-# License for the specific language governing permissions and limitations
-# under the License.
-##
-
-from charmhelpers.core.hookenv import (
- config,
-)
-import io
-import paramiko
-
-from subprocess import (
- Popen,
- CalledProcessError,
- PIPE,
-)
-
-
-def _run(cmd, env=None):
- """ Run a command, either on the local machine or remotely via SSH. """
- if isinstance(cmd, str):
- cmd = cmd.split(' ') if ' ' in cmd else [cmd]
-
- cfg = config()
- if all(k in cfg for k in ['ssh-hostname', 'ssh-username',
- 'ssh-password', 'ssh-private-key']):
- host = cfg['ssh-hostname']
- user = cfg['ssh-username']
- passwd = cfg['ssh-password']
- key = cfg['ssh-private-key']
-
- if host and user and (passwd or key):
- return ssh(cmd, host, user, passwd, key)
-
- p = Popen(cmd,
- env=env,
- shell=True,
- stdout=PIPE,
- stderr=PIPE)
- stdout, stderr = p.communicate()
- retcode = p.poll()
- if retcode > 0:
- raise CalledProcessError(returncode=retcode,
- cmd=cmd,
- output=stderr.decode("utf-8").strip())
- return (stdout.decode('utf-8').strip(), stderr.decode('utf-8').strip())
-
-
-def get_ssh_client(host, user, password=None, key=None):
- """Return a connected Paramiko ssh object"""
-
- client = paramiko.SSHClient()
- client.set_missing_host_key_policy(paramiko.AutoAddPolicy())
-
- pkey = None
- if key:
- f = io.StringIO(key)
- pkey = paramiko.RSAKey.from_private_key(f)
-
- ###########################################################################
- # There is a bug in some versions of OpenSSH 4.3 (CentOS/RHEL 5) where #
- # the server may not send the SSH_MSG_USERAUTH_BANNER message except when #
- # responding to an auth_none request. For example, paramiko will attempt #
- # to use password authentication when a password is set, but the server #
- # could deny that, instead requesting keyboard-interactive. The hack to #
- # workaround this is to attempt a reconnect, which will receive the right #
- # banner, and authentication can proceed. See the following for more info #
- # https://github.com/paramiko/paramiko/issues/432 #
- # https://github.com/paramiko/paramiko/pull/438 #
- ###########################################################################
-
- try:
- client.connect(host, port=22, username=user,
- password=password, pkey=pkey)
- except paramiko.ssh_exception.SSHException as e:
- if 'Error reading SSH protocol banner' == str(e):
- # Once more, with feeling
- client.connect(host, port=22, username=user,
- password=password, pkey=pkey)
- pass
- else:
- raise paramiko.ssh_exception.SSHException(e)
-
- return client
-
-
-def sftp(local_file, remote_file, host, user, password=None, key=None):
- """Copy a local file to a remote host"""
- client = get_ssh_client(host, user, password, key)
-
- # Create an sftp connection from the underlying transport
- sftp = paramiko.SFTPClient.from_transport(client.get_transport())
- sftp.put(local_file, remote_file)
- client.close()
-
-
-def ssh(cmd, host, user, password=None, key=None):
- """ Run an arbitrary command over SSH. """
- client = get_ssh_client(host, user, password, key)
-
- cmds = ' '.join(cmd)
- stdin, stdout, stderr = client.exec_command(cmds, get_pty=True)
- retcode = stdout.channel.recv_exit_status()
- client.close() # @TODO re-use connections
- if retcode > 0:
- output = stderr.read().strip()
- raise CalledProcessError(returncode=retcode, cmd=cmd,
- output=output)
- return (
- stdout.read().decode('utf-8').strip(),
- stderr.read().decode('utf-8').strip()
- )
diff --git a/charms/layers/sshproxy/metadata.yaml b/charms/layers/sshproxy/metadata.yaml
deleted file mode 100644
index effeb6a..0000000
--- a/charms/layers/sshproxy/metadata.yaml
+++ /dev/null
@@ -1,31 +0,0 @@
-##
-# Copyright 2016 Canonical Ltd.
-# All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License"); you may
-# not use this file except in compliance with the License. You may obtain
-# a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-# License for the specific language governing permissions and limitations
-# under the License.
-##
-
-name: sshproxy
-summary: Layer to copy files to or run commands on a remote host over ssh
-maintainer: Adam Israel <adam.israel@canonical.com>
-description: |
- This layer is intended to provide common ssh functionality, such as
- running a command on a remote host.
-series:
- - trusty
- - xenial
-tags:
- # Replace "misc" with one or more whitelisted tags from this list:
- # https://jujucharms.com/docs/stable/authors-charm-metadata
- - misc
-subordinate: false
diff --git a/charms/layers/sshproxy/reactive/sshproxy.py b/charms/layers/sshproxy/reactive/sshproxy.py
deleted file mode 100644
index e1508ca..0000000
--- a/charms/layers/sshproxy/reactive/sshproxy.py
+++ /dev/null
@@ -1,73 +0,0 @@
-##
-# Copyright 2016 Canonical Ltd.
-# All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License"); you may
-# not use this file except in compliance with the License. You may obtain
-# a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-# License for the specific language governing permissions and limitations
-# under the License.
-##
-
-from charmhelpers.core.hookenv import (
- action_fail,
- action_get,
- action_set,
- config,
-)
-from charms.reactive import (
- remove_state,
- set_state,
- when,
-)
-import charms.sshproxy
-import subprocess
-
-
-@when('config.changed')
-def ssh_configured():
- """ Checks to see if the charm is configured with SSH credentials. If so,
- set a state flag that can be used to execute ssh-only actions.
-
- For example:
-
- @when('sshproxy.configured')
- def run_remote_command(cmd):
- ...
-
- @when_not('sshproxy.configured')
- def run_local_command(cmd):
- ...
- """
- cfg = config()
- if all(k in cfg for k in ['ssh-hostname', 'ssh-username',
- 'ssh-password', 'ssh-private-key']):
- set_state('sshproxy.configured')
- else:
- remove_state('sshproxy.configured')
-
-
-@when('actions.run')
-def run_command():
- """
- Run an arbitrary command, either locally or over SSH with the configured
- credentials.
- """
- try:
- cmd = action_get('command')
- output, err = charms.sshproxy._run(cmd)
- if len(err):
- action_fail("Command '{}' returned error code {}".format(cmd, err))
- else:
- action_set({'output': output})
- except subprocess.CalledProcessError as e:
- action_fail('Command failed: %s (%s)' %
- (' '.join(e.cmd), str(e.output)))
- finally:
- remove_state('actions.run')
diff --git a/charms/layers/sshproxy/tests/00-setup b/charms/layers/sshproxy/tests/00-setup
deleted file mode 100755
index 1e5f91b..0000000
--- a/charms/layers/sshproxy/tests/00-setup
+++ /dev/null
@@ -1,22 +0,0 @@
-##
-# Copyright 2016 Canonical Ltd.
-# All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License"); you may
-# not use this file except in compliance with the License. You may obtain
-# a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-# License for the specific language governing permissions and limitations
-# under the License.
-##
-
-#!/bin/bash
-
-sudo add-apt-repository ppa:juju/stable -y
-sudo apt-get update
-sudo apt-get install amulet python-requests -y
diff --git a/charms/layers/sshproxy/tests/10-deploy b/charms/layers/sshproxy/tests/10-deploy
deleted file mode 100755
index f5d2f5d..0000000
--- a/charms/layers/sshproxy/tests/10-deploy
+++ /dev/null
@@ -1,76 +0,0 @@
-##
-# Copyright 2016 Canonical Ltd.
-# All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License"); you may
-# not use this file except in compliance with the License. You may obtain
-# a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-# License for the specific language governing permissions and limitations
-# under the License.
-##
-
-#!/usr/bin/python3
-
-import amulet
-import requests
-import unittest
-import string
-import random
-
-
-class TestCharm(unittest.TestCase):
- user = None
- passwd = None
-
- def id_generator(self, size=6, chars=string.ascii_uppercase + string.digits):
- return ''.join(random.choice(chars) for _ in range(size))
-
- def setUp(self):
-
- # Setup random user/password
- self.user = self.id_generator()
- self.passwd = self.id_generator()
-
- self.d = amulet.Deployment()
-
- self.d.add('sshproxy')
- self.d.add('ubuntu')
-
- self.d.expose('sshproxy')
-
- self.d.setup(timeout=900)
- self.d.sentry.wait()
-
- # Add
- ubuntu_0 = d.sentry['ubuntu'][0]
- ubuntu_0.ssh("sudo adduser {}".format(self.user))
- ubuntu_0.ssh("echo '{}' | sudo passwd {} --stdin".format(self.passwd, self.user))
-
- self.unit = self.d.sentry['sshproxy'][0]
-
- def test_service(self):
-
- # Configure the unit
-
- # Run a command
-
- # Verify the output
-
- # test we can access over http
- # page = requests.get('http://{}'.format(self.unit.info['public-address']))
- # self.assertEqual(page.status_code, 200)
- # Now you can use self.d.sentry[SERVICE][UNIT] to address each of the units and perform
- # more in-depth steps. Each self.d.sentry[SERVICE][UNIT] has the following methods:
- # - .info - An array of the information of that unit from Juju
- # - .file(PATH) - Get the details of a file on that unit
- # - .file_contents(PATH) - Get plain text output of PATH file from that unit
- # - .directory(PATH) - Get details of directory
- # - .directory_contents(PATH) - List files and folders in PATH on that unit
- # - .relation(relation, service:rel) - Get relation data from return service
- pass
diff --git a/charms/layers/sshproxy/wheelhouse.txt b/charms/layers/sshproxy/wheelhouse.txt
deleted file mode 100644
index ab6de07..0000000
--- a/charms/layers/sshproxy/wheelhouse.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-##
-# Copyright 2016 Canonical Ltd.
-# All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License"); you may
-# not use this file except in compliance with the License. You may obtain
-# a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-# License for the specific language governing permissions and limitations
-# under the License.
-##
-
-paramiko>=1.16.0,<1.17
diff --git a/charms/layers/vnfproxy/README.md b/charms/layers/vnfproxy/README.md
deleted file mode 100644
index 8379e50..0000000
--- a/charms/layers/vnfproxy/README.md
+++ /dev/null
@@ -1,172 +0,0 @@
-# vnfproxy
-
-## Overview
-
-This charm layer is intended for use by vendors who wish to integrate with
-OSM. The current release of OSM only supports a lightweight version of Juju
-charms, which we will refer to as "proxy charms". Consider the diagram below:
-
-```
-+---------------------+ +---------------------+
-| <----+ |
-| Resource | | Service |
-| Orchestrator (RO) +----> Orchestrator (SO) |
-| | | |
-+------------------+--+ +-------+----^--------+
- | | |
- | | |
- | | |
- +-----v-----+ +-v----+--+
- | <-------+ |
- | Virtual | | Proxy |
- | Machine | | Charm |
- | +-------> |
- +-----------+ +---------+
-```
-
-The Virtual Machine (VM) is created by the Resource Orchestrator (RO), at the
-request of the Service Orchestrator (SO). Once the VM has been created, a
-"proxy charm" is deployed in order to facilitate operations between the SO and
-your service running within the VM.
-
-As such, a proxy charm will expose a number of "actions" that are run via the
-SO. By default, the following actions are exposed:
-
-```bash
-actions
-├── reboot
-├── restart
-├── run
-├── start
-└── stop
-```
-
-Some actions, such as `run` and `reboot`, do not require any additional configuration. `start`, `stop` and `restart`, however, will require you to
-implement the command(s) required to interact with your service.
-
-## Usage
-
-Create the framework for your proxy charm:
-
-```bash
-$ charm create pingpong
-$ cd pingpong
-```
-
-Modify `layer.yaml` to the following:
-```yaml
-includes:
- - layer:basic
- - layer:vnfproxy
-```
-
-The `metadata.yaml` describes your service. It should look similar to the following:
-
-```yaml
-name: vnfproxy
-summary: A layer for developing OSM "proxy" charms.
-maintainer: Adam Israel <adam.israel@canonical.com>
-description: |
- VNF "proxy" charms are a lightweight version of a charm that, rather than
- installing software on the same machine, execute commands over an ssh channel.
-series:
- - trusty
- - xenial
-tags:
- - osm
- - vnf
-subordinate: false
-```
-
-Implement the default action(s) you wish to support by adding the following code to reactive/pingpong.py and fill in the cmd to be run:
-
-```python
-@when('actions.start')
-def start():
- err = ''
- try:
- cmd = ""
- result, err = charms.sshproxy._run(cmd)
- except:
- action_fail('command failed:' + err)
- else:
- action_set({'outout': result})
- finally:
- remove_flag('actions.start')
-
-
-@when('actions.stop')
-def stop():
- err = ''
- try:
- # Enter the command to stop your service(s)
- cmd = "service myname stop"
- result, err = charms.sshproxy._run(cmd)
- except:
- action_fail('command failed:' + err)
- else:
- action_set({'outout': result})
- finally:
- remove_flag('actions.stop')
-
-
-@when('actions.restart')
-def restart():
- err = ''
- try:
- # Enter the command to restart your service(s)
- cmd = "service myname restart"
- result, err = charms.sshproxy._run(cmd)
- except:
- action_fail('command failed:' + err)
- else:
- action_set({'outout': result})
- finally:
- remove_flag('actions.restart')
-```
-
-Rename `README.ex` to `README.md` and describe your application and its usage.
-
--- fix this. there are cases where the config is useful -- Delete `config.yaml`, since the charm's configuration will be driven by the SO.
-
-Create the `actions.yaml` file; this will describe the additional operations you would like to perform on or against your service.
-
-```yaml
-set-server:
- description: "Set the target IP address and port"
- params:
- server-ip:
- description: "IP on which the target service is listening."
- type: string
- default: ""
- server-port:
- description: "Port on which the target service is listening."
- type: integer
- default: 5555
- required:
- - server-ip
-set-rate:
- description: "Set the rate of packet generation."
- params:
- rate:
- description: "Packet rate."
- type: integer
- default: 5
-get-stats:
- description: "Get the stats."
-get-state:
- description: "Get the admin state of the target service."
-get-rate:
- description: "Get the rate set on the target service."
-get-server:
- description: "Get the target server and IP set"
-```
-
-
-Once you've implemented your actions, you need to compile the various charm layers:
-```bash
-$ charm build
-
-```
-
-## Contact
diff --git a/charms/layers/vnfproxy/actions.yaml b/charms/layers/vnfproxy/actions.yaml
deleted file mode 100644
index a9ee2ba..0000000
--- a/charms/layers/vnfproxy/actions.yaml
+++ /dev/null
@@ -1,25 +0,0 @@
-##
-# Copyright 2016 Canonical Ltd.
-# All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License"); you may
-# not use this file except in compliance with the License. You may obtain
-# a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-# License for the specific language governing permissions and limitations
-# under the License.
-##
-
-start:
- description: "Stop the service"
-stop:
- description: "Stop the service"
-restart:
- description: "Stop the service"
-reboot:
- description: "Reboot the machine"
diff --git a/charms/layers/vnfproxy/actions/reboot b/charms/layers/vnfproxy/actions/reboot
deleted file mode 100755
index 751c88c..0000000
--- a/charms/layers/vnfproxy/actions/reboot
+++ /dev/null
@@ -1,34 +0,0 @@
-#!/usr/bin/env python3
-##
-# Copyright 2016 Canonical Ltd.
-# All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License"); you may
-# not use this file except in compliance with the License. You may obtain
-# a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-# License for the specific language governing permissions and limitations
-# under the License.
-##
-import sys
-sys.path.append('lib')
-
-from charms.reactive import main
-from charms.reactive import set_state
-from charmhelpers.core.hookenv import action_fail
-
-"""
-`set_state` only works here because it's flushed to disk inside the `main()`
-loop. remove_state will need to be called inside the action method.
-"""
-set_state('actions.reboot')
-
-try:
- main()
-except Exception as e:
- action_fail(repr(e))
diff --git a/charms/layers/vnfproxy/actions/restart b/charms/layers/vnfproxy/actions/restart
deleted file mode 100755
index f62929b..0000000
--- a/charms/layers/vnfproxy/actions/restart
+++ /dev/null
@@ -1,35 +0,0 @@
-#!/usr/bin/env python3
-##
-# Copyright 2016 Canonical Ltd.
-# All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License"); you may
-# not use this file except in compliance with the License. You may obtain
-# a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-# License for the specific language governing permissions and limitations
-# under the License.
-##
-
-import sys
-sys.path.append('lib')
-
-from charms.reactive import main
-from charms.reactive import set_state
-from charmhelpers.core.hookenv import action_fail
-
-"""
-`set_state` only works here because it's flushed to disk inside the `main()`
-loop. remove_state will need to be called inside the action method.
-"""
-set_state('actions.restart')
-
-try:
- main()
-except Exception as e:
- action_fail(repr(e))
diff --git a/charms/layers/vnfproxy/actions/start b/charms/layers/vnfproxy/actions/start
deleted file mode 100755
index a9db3d0..0000000
--- a/charms/layers/vnfproxy/actions/start
+++ /dev/null
@@ -1,35 +0,0 @@
-#!/usr/bin/env python3
-##
-# Copyright 2016 Canonical Ltd.
-# All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License"); you may
-# not use this file except in compliance with the License. You may obtain
-# a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-# License for the specific language governing permissions and limitations
-# under the License.
-##
-
-import sys
-sys.path.append('lib')
-
-from charms.reactive import main
-from charms.reactive import set_state
-from charmhelpers.core.hookenv import action_fail
-
-"""
-`set_state` only works here because it's flushed to disk inside the `main()`
-loop. remove_state will need to be called inside the action method.
-"""
-set_state('actions.start')
-
-try:
- main()
-except Exception as e:
- action_fail(repr(e))
diff --git a/charms/layers/vnfproxy/actions/stop b/charms/layers/vnfproxy/actions/stop
deleted file mode 100755
index 3890486..0000000
--- a/charms/layers/vnfproxy/actions/stop
+++ /dev/null
@@ -1,35 +0,0 @@
-#!/usr/bin/env python3
-##
-# Copyright 2016 Canonical Ltd.
-# All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License"); you may
-# not use this file except in compliance with the License. You may obtain
-# a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-# License for the specific language governing permissions and limitations
-# under the License.
-##
-
-import sys
-sys.path.append('lib')
-
-from charms.reactive import main
-from charms.reactive import set_state
-from charmhelpers.core.hookenv import action_fail
-
-"""
-`set_state` only works here because it's flushed to disk inside the `main()`
-loop. remove_state will need to be called inside the action method.
-"""
-set_state('actions.stop')
-
-try:
- main()
-except Exception as e:
- action_fail(repr(e))
diff --git a/charms/layers/vnfproxy/icon.svg b/charms/layers/vnfproxy/icon.svg
deleted file mode 100644
index e092eef..0000000
--- a/charms/layers/vnfproxy/icon.svg
+++ /dev/null
@@ -1,279 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<!-- Created with Inkscape (http://www.inkscape.org/) -->
-
-<svg
- xmlns:dc="http://purl.org/dc/elements/1.1/"
- xmlns:cc="http://creativecommons.org/ns#"
- xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
- xmlns:svg="http://www.w3.org/2000/svg"
- xmlns="http://www.w3.org/2000/svg"
- xmlns:xlink="http://www.w3.org/1999/xlink"
- xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
- xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
- width="96"
- height="96"
- id="svg6517"
- version="1.1"
- inkscape:version="0.48+devel r12274"
- sodipodi:docname="Juju_charm_icon_template.svg">
- <defs
- id="defs6519">
- <linearGradient
- inkscape:collect="always"
- xlink:href="#Background"
- id="linearGradient6461"
- gradientUnits="userSpaceOnUse"
- x1="0"
- y1="970.29498"
- x2="144"
- y2="970.29498"
- gradientTransform="matrix(0,-0.66666669,0.6660448,0,-866.25992,731.29077)" />
- <linearGradient
- id="Background">
- <stop
- id="stop4178"
- offset="0"
- style="stop-color:#b8b8b8;stop-opacity:1" />
- <stop
- id="stop4180"
- offset="1"
- style="stop-color:#c9c9c9;stop-opacity:1" />
- </linearGradient>
- <filter
- style="color-interpolation-filters:sRGB;"
- inkscape:label="Inner Shadow"
- id="filter1121">
- <feFlood
- flood-opacity="0.59999999999999998"
- flood-color="rgb(0,0,0)"
- result="flood"
- id="feFlood1123" />
- <feComposite
- in="flood"
- in2="SourceGraphic"
- operator="out"
- result="composite1"
- id="feComposite1125" />
- <feGaussianBlur
- in="composite1"
- stdDeviation="1"
- result="blur"
- id="feGaussianBlur1127" />
- <feOffset
- dx="0"
- dy="2"
- result="offset"
- id="feOffset1129" />
- <feComposite
- in="offset"
- in2="SourceGraphic"
- operator="atop"
- result="composite2"
- id="feComposite1131" />
- </filter>
- <filter
- style="color-interpolation-filters:sRGB;"
- inkscape:label="Drop Shadow"
- id="filter950">
- <feFlood
- flood-opacity="0.25"
- flood-color="rgb(0,0,0)"
- result="flood"
- id="feFlood952" />
- <feComposite
- in="flood"
- in2="SourceGraphic"
- operator="in"
- result="composite1"
- id="feComposite954" />
- <feGaussianBlur
- in="composite1"
- stdDeviation="1"
- result="blur"
- id="feGaussianBlur956" />
- <feOffset
- dx="0"
- dy="1"
- result="offset"
- id="feOffset958" />
- <feComposite
- in="SourceGraphic"
- in2="offset"
- operator="over"
- result="composite2"
- id="feComposite960" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath873">
- <g
- transform="matrix(0,-0.66666667,0.66604479,0,-258.25992,677.00001)"
- id="g875"
- inkscape:label="Layer 1"
- style="fill:#ff00ff;fill-opacity:1;stroke:none;display:inline">
- <path
- style="fill:#ff00ff;fill-opacity:1;stroke:none;display:inline"
- d="m 46.702703,898.22775 50.594594,0 C 138.16216,898.22775 144,904.06497 144,944.92583 l 0,50.73846 c 0,40.86071 -5.83784,46.69791 -46.702703,46.69791 l -50.594594,0 C 5.8378378,1042.3622 0,1036.525 0,995.66429 L 0,944.92583 C 0,904.06497 5.8378378,898.22775 46.702703,898.22775 Z"
- id="path877"
- inkscape:connector-curvature="0"
- sodipodi:nodetypes="sssssssss" />
- </g>
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter891"
- inkscape:label="Badge Shadow">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.71999962"
- id="feGaussianBlur893" />
- </filter>
- </defs>
- <sodipodi:namedview
- id="base"
- pagecolor="#ffffff"
- bordercolor="#666666"
- borderopacity="1.0"
- inkscape:pageopacity="0.0"
- inkscape:pageshadow="2"
- inkscape:zoom="4.0745362"
- inkscape:cx="18.514671"
- inkscape:cy="49.018169"
- inkscape:document-units="px"
- inkscape:current-layer="layer1"
- showgrid="true"
- fit-margin-top="0"
- fit-margin-left="0"
- fit-margin-right="0"
- fit-margin-bottom="0"
- inkscape:window-width="1920"
- inkscape:window-height="1029"
- inkscape:window-x="0"
- inkscape:window-y="24"
- inkscape:window-maximized="1"
- showborder="true"
- showguides="true"
- inkscape:guide-bbox="true"
- inkscape:showpageshadow="false">
- <inkscape:grid
- type="xygrid"
- id="grid821" />
- <sodipodi:guide
- orientation="1,0"
- position="16,48"
- id="guide823" />
- <sodipodi:guide
- orientation="0,1"
- position="64,80"
- id="guide825" />
- <sodipodi:guide
- orientation="1,0"
- position="80,40"
- id="guide827" />
- <sodipodi:guide
- orientation="0,1"
- position="64,16"
- id="guide829" />
- </sodipodi:namedview>
- <metadata
- id="metadata6522">
- <rdf:RDF>
- <cc:Work
- rdf:about="">
- <dc:format>image/svg+xml</dc:format>
- <dc:type
- rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
- <dc:title></dc:title>
- </cc:Work>
- </rdf:RDF>
- </metadata>
- <g
- inkscape:label="BACKGROUND"
- inkscape:groupmode="layer"
- id="layer1"
- transform="translate(268,-635.29076)"
- style="display:inline">
- <path
- style="fill:url(#linearGradient6461);fill-opacity:1;stroke:none;display:inline;filter:url(#filter1121)"
- d="m -268,700.15563 0,-33.72973 c 0,-27.24324 3.88785,-31.13513 31.10302,-31.13513 l 33.79408,0 c 27.21507,0 31.1029,3.89189 31.1029,31.13513 l 0,33.72973 c 0,27.24325 -3.88783,31.13514 -31.1029,31.13514 l -33.79408,0 C -264.11215,731.29077 -268,727.39888 -268,700.15563 Z"
- id="path6455"
- inkscape:connector-curvature="0"
- sodipodi:nodetypes="sssssssss" />
- </g>
- <g
- inkscape:groupmode="layer"
- id="layer3"
- inkscape:label="PLACE YOUR PICTOGRAM HERE"
- style="display:inline" />
- <g
- inkscape:groupmode="layer"
- id="layer2"
- inkscape:label="BADGE"
- style="display:none"
- sodipodi:insensitive="true">
- <g
- style="display:inline"
- transform="translate(-340.00001,-581)"
- id="g4394"
- clip-path="none">
- <g
- id="g855">
- <g
- inkscape:groupmode="maskhelper"
- id="g870"
- clip-path="url(#clipPath873)"
- style="opacity:0.6;filter:url(#filter891)">
- <path
- transform="matrix(1.4999992,0,0,1.4999992,-29.999795,-237.54282)"
- d="m 264,552.36218 a 12,12 0 1 1 -24,0 A 12,12 0 1 1 264,552.36218 Z"
- sodipodi:ry="12"
- sodipodi:rx="12"
- sodipodi:cy="552.36218"
- sodipodi:cx="252"
- id="path844"
- style="color:#000000;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:4;marker:none;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- sodipodi:type="arc" />
- </g>
- <g
- id="g862">
- <path
- sodipodi:type="arc"
- style="color:#000000;fill:#f5f5f5;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:4;marker:none;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- id="path4398"
- sodipodi:cx="252"
- sodipodi:cy="552.36218"
- sodipodi:rx="12"
- sodipodi:ry="12"
- d="m 264,552.36218 a 12,12 0 1 1 -24,0 A 12,12 0 1 1 264,552.36218 Z"
- transform="matrix(1.4999992,0,0,1.4999992,-29.999795,-238.54282)" />
- <path
- transform="matrix(1.25,0,0,1.25,33,-100.45273)"
- d="m 264,552.36218 a 12,12 0 1 1 -24,0 A 12,12 0 1 1 264,552.36218 Z"
- sodipodi:ry="12"
- sodipodi:rx="12"
- sodipodi:cy="552.36218"
- sodipodi:cx="252"
- id="path4400"
- style="color:#000000;fill:#dd4814;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:4;marker:none;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- sodipodi:type="arc" />
- <path
- sodipodi:type="star"
- style="color:#000000;fill:#f5f5f5;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:3;marker:none;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- id="path4459"
- sodipodi:sides="5"
- sodipodi:cx="666.19574"
- sodipodi:cy="589.50385"
- sodipodi:r1="7.2431178"
- sodipodi:r2="4.3458705"
- sodipodi:arg1="1.0471976"
- sodipodi:arg2="1.6755161"
- inkscape:flatsided="false"
- inkscape:rounded="0.1"
- inkscape:randomized="0"
- d="m 669.8173,595.77657 c -0.39132,0.22593 -3.62645,-1.90343 -4.07583,-1.95066 -0.44938,-0.0472 -4.05653,1.36297 -4.39232,1.06062 -0.3358,-0.30235 0.68963,-4.03715 0.59569,-4.47913 -0.0939,-0.44198 -2.5498,-3.43681 -2.36602,-3.8496 0.18379,-0.41279 4.05267,-0.59166 4.44398,-0.81759 0.39132,-0.22593 2.48067,-3.48704 2.93005,-3.4398 0.44938,0.0472 1.81505,3.67147 2.15084,3.97382 0.3358,0.30236 4.08294,1.2817 4.17689,1.72369 0.0939,0.44198 -2.9309,2.86076 -3.11469,3.27355 C 669.9821,591.68426 670.20862,595.55064 669.8173,595.77657 Z"
- transform="matrix(1.511423,-0.16366377,0.16366377,1.511423,-755.37346,-191.93651)" />
- </g>
- </g>
- </g>
- </g>
-</svg>
diff --git a/charms/layers/vnfproxy/layer.yaml b/charms/layers/vnfproxy/layer.yaml
deleted file mode 100644
index 89bf245..0000000
--- a/charms/layers/vnfproxy/layer.yaml
+++ /dev/null
@@ -1,20 +0,0 @@
-##
-# Copyright 2016 Canonical Ltd.
-# All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License"); you may
-# not use this file except in compliance with the License. You may obtain
-# a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-# License for the specific language governing permissions and limitations
-# under the License.
-##
-
-includes:
- - layer:basic
- - layer:sshproxy
diff --git a/charms/layers/vnfproxy/metadata.yaml b/charms/layers/vnfproxy/metadata.yaml
deleted file mode 100644
index 909643d..0000000
--- a/charms/layers/vnfproxy/metadata.yaml
+++ /dev/null
@@ -1,30 +0,0 @@
-##
-# Copyright 2016 Canonical Ltd.
-# All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License"); you may
-# not use this file except in compliance with the License. You may obtain
-# a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-# License for the specific language governing permissions and limitations
-# under the License.
-##
-
-name: vnfproxy
-summary: A layer for developing OSM "proxy" charms.
-maintainer: Adam Israel <adam.israel@canonical.com>
-description: |
- VNF "proxy" charms are a lightweight version of a charm that, rather than
- installing software on the same machine, execute commands over an ssh channel.
-series:
- - trusty
- - xenial
-tags:
- - osm
- - vnf
-subordinate: false
diff --git a/charms/layers/vnfproxy/reactive/vnfproxy.py b/charms/layers/vnfproxy/reactive/vnfproxy.py
deleted file mode 100644
index 2b26212..0000000
--- a/charms/layers/vnfproxy/reactive/vnfproxy.py
+++ /dev/null
@@ -1,75 +0,0 @@
-from charmhelpers.core.hookenv import (
- action_fail,
- action_set,
-)
-
-from charms.reactive import (
- when,
- remove_state as remove_flag,
-)
-import charms.sshproxy
-
-
-@when('actions.reboot')
-def reboot():
- err = ''
- try:
- result, err = charms.sshproxy._run("reboot")
- except:
- action_fail('command failed:' + err)
- else:
- action_set({'outout': result})
- finally:
- remove_flag('actions.reboot')
-
-
-###############################################################################
-# Below is an example implementation of the start/stop/restart actions. #
-# To use this, copy the below code into your layer and add the appropriate #
-# command(s) necessary to perform the action. #
-###############################################################################
-
-# @when('actions.start')
-# def start():
-# err = ''
-# try:
-# cmd = "service myname start"
-# result, err = charms.sshproxy._run(cmd)
-# except:
-# action_fail('command failed:' + err)
-# else:
-# action_set({'outout': result})
-# finally:
-# remove_flag('actions.start')
-#
-#
-# @when('actions.stop')
-# def stop():
-# err = ''
-# try:
-# # Enter the command to stop your service(s)
-# cmd = "service myname stop"
-# result, err = charms.sshproxy._run(cmd)
-# except:
-# action_fail('command failed:' + err)
-# else:
-# action_set({'outout': result})
-# finally:
-# remove_flag('actions.stop')
-#
-#
-# @when('actions.restart')
-# def restart():
-# err = ''
-# try:
-# # Enter the command to restart your service(s)
-# cmd = "service myname restart"
-# result, err = charms.sshproxy._run(cmd)
-# except:
-# action_fail('command failed:' + err)
-# else:
-# action_set({'outout': result})
-# finally:
-# remove_flag('actions.restart')
-#
-#
diff --git a/charms/layers/vnfproxy/tests/00-setup b/charms/layers/vnfproxy/tests/00-setup
deleted file mode 100755
index 1e5f91b..0000000
--- a/charms/layers/vnfproxy/tests/00-setup
+++ /dev/null
@@ -1,22 +0,0 @@
-##
-# Copyright 2016 Canonical Ltd.
-# All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License"); you may
-# not use this file except in compliance with the License. You may obtain
-# a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-# License for the specific language governing permissions and limitations
-# under the License.
-##
-
-#!/bin/bash
-
-sudo add-apt-repository ppa:juju/stable -y
-sudo apt-get update
-sudo apt-get install amulet python-requests -y
diff --git a/charms/layers/vnfproxy/tests/10-deploy b/charms/layers/vnfproxy/tests/10-deploy
deleted file mode 100755
index 5bb9044..0000000
--- a/charms/layers/vnfproxy/tests/10-deploy
+++ /dev/null
@@ -1,52 +0,0 @@
-##
-# Copyright 2016 Canonical Ltd.
-# All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License"); you may
-# not use this file except in compliance with the License. You may obtain
-# a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-# License for the specific language governing permissions and limitations
-# under the License.
-##
-
-#!/usr/bin/python3
-
-import amulet
-import requests
-import unittest
-
-
-class TestCharm(unittest.TestCase):
- def setUp(self):
- self.d = amulet.Deployment()
-
- self.d.add('vnfproxy')
- self.d.expose('vnfproxy')
-
- self.d.setup(timeout=900)
- self.d.sentry.wait()
-
- self.unit = self.d.sentry['vnfproxy'][0]
-
- def test_service(self):
- # test we can access over http
- page = requests.get('http://{}'.format(self.unit.info['public-address']))
- self.assertEqual(page.status_code, 200)
- # Now you can use self.d.sentry[SERVICE][UNIT] to address each of the units and perform
- # more in-depth steps. Each self.d.sentry[SERVICE][UNIT] has the following methods:
- # - .info - An array of the information of that unit from Juju
- # - .file(PATH) - Get the details of a file on that unit
- # - .file_contents(PATH) - Get plain text output of PATH file from that unit
- # - .directory(PATH) - Get details of directory
- # - .directory_contents(PATH) - List files and folders in PATH on that unit
- # - .relation(relation, service:rel) - Get relation data from return service
-
-
-if __name__ == '__main__':
- unittest.main()
