diff --git a/scripts/get-options.sh b/scripts/get-options.sh
new file mode 100644
index 0000000..82ec06c
--- /dev/null
+++ b/scripts/get-options.sh
@@ -0,0 +1,175 @@
+#!/bin/bash
+
+##
+# Copyright 2015 Telefónica Investigación y Desarrollo, S.A.U.
+# This file is part of openmano
+# All Rights Reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License"); you may
+# not use this file except in compliance with the License. You may obtain
+# a copy of the License at
+#
+#         http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+# License for the specific language governing permissions and limitations
+# under the License.
+#
+# For those usages not covered by the Apache License, Version 2.0 please
+# contact with: nfvlabs@tid.es
+##
+
+
+#Utility for getting options, must be call with source
+#for every <option> it sets a variable 'option_<option>="-"' 
+#if the option appears more than once, it concatenates a "-"
+#if the option contains an argument: 'option_<option>="argument"'
+#if the long option name contains "-" they are converted to "_"
+#params that are not options are stored in 'params'
+#the options to look for is received in the first argument, 
+#a blank separator list with short and long options without the leading - or --
+#options to be stored in the same variable must appear in the same word separated by ':'
+#insert a trailing = if the option requires an argument
+#insert a trailing ? if the option may have an argument NOT IMPLEMENTED
+#option -- means get the rest of argument returned as 'option__=$*'
+
+#example: to allow options -h --help -j -k(with argument) --my-long-option(with argument)
+# and other parameters after -- provide
+#     "help:h j k= my-long-option="
+#parsing "-h -karg pepe --my-long-option=otherar -- -s" will set variables
+#       option_help="-"
+#       option_k="arg"
+#       option_my_long_option="otherarg"
+#       params=" pepe"
+#       option__="-s"
+
+
+#detect if is called with a source to use the 'exit'/'return' command for exiting
+[[ ${BASH_SOURCE[0]} != $0 ]] && ___exit="return" || ___exit="exit"
+
+options="$1"
+shift
+
+get_argument=""
+#reset variables
+params=""
+for option_group in $options
+do
+    _name=${option_group%%:*}
+    _name=${_name%=}
+    _name=${_name//-/_}
+    eval option_${_name}='""'
+done
+
+while [[ $# -gt 0 ]]
+do
+    argument="$1"
+    shift
+    if [[ -n $get_argument ]]
+    then
+        [[ ${argument:0:1} == "-" ]] && echo "option '-$option' requires an argument"  >&2 && $___exit 1
+        eval ${get_argument}='"$argument"'
+        #echo option $get_argument with argument
+        get_argument=""
+        continue
+    fi
+
+
+    #short options
+    if [[ ${argument:0:1} == "-" ]] && [[ ${argument:1:1} != "-" ]] && [[ ${#argument} -ge 2 ]]
+    then
+        index=0
+        while index=$((index+1)) && [[ $index -lt ${#argument} ]]
+        do
+            option=${argument:$index:1}
+            bad_option=y
+            for option_group in $options
+            do
+                _name=""
+                for o in $(echo $option_group | tr ":=" " ")
+                do
+                    [[ -z "$_name" ]] && _name=${o//-/_}
+                    #echo option $option versus $o
+                    if [[ "$option" == "${o}" ]]
+                    then
+                        eval option_${_name}='${option_'${_name}'}-'
+                        bad_option=n
+                        if [[ ${option_group:${#option_group}-1} != "=" ]]
+                        then
+                            continue
+                        fi 
+                        if [[ ${#argument} -gt $((index+1)) ]]
+                        then
+                            eval option_${_name}='"${argument:$((index+1))}"'
+                            index=${#argument}
+                        else
+                            get_argument=option_${_name}
+                            #echo next should be argument $argument
+                        fi
+    
+                        break
+                    fi
+                done
+            done
+            [[ $bad_option == y ]] && echo "invalid argument '-$option'?  Type -h for help" >&2 && $___exit 1
+        done
+    elif [[ ${argument:0:2} == "--" ]] && [[ ${#argument} -ge 3 ]]
+    then 
+        option=${argument:2}
+        option_argument=${option#*=}
+        option_name=${option%%=*}
+        [[ "$option_name" == "$option" ]] && option_argument=""
+        bad_option=y
+        for option_group in $options
+        do
+            _name=""
+            for o in $(echo $option_group | tr ":=" " ")
+            do
+                [[ -z "$_name" ]] && _name=${o//-/_}
+                #echo option $option versus $o
+                if [[ "$option_name" == "${o}" ]]
+                then
+                    bad_option=n
+                    if [[ ${option_group:${#option_group}-1} != "=" ]] 
+                    then #not an argument
+                        [[ -n "${option_argument}" ]] && echo "option '--${option%%=*}' do not accept an argument " >&2 && $___exit 1
+                        eval option_${_name}='"${option_'${_name}'}-"'
+                    elif [[ -n "${option_argument}" ]]
+                    then
+                        eval option_${_name}='"${option_argument}"'
+                    else
+                        get_argument=option_${_name}
+                        #echo next should be argument $argument
+                    fi
+                    break
+                fi
+            done
+        done
+        [[ $bad_option == y ]] && echo "invalid argument '-$option'?  Type -h for help" >&2 && $___exit 1
+    elif [[ ${argument:0:2} == "--" ]]
+    then
+        option__="$*"
+        bad_option=y
+        for o in $options
+        do
+            if [[ "$o" == "--" ]]
+            then
+                bad_option=n
+                option__=" $*"
+                break
+            fi
+        done
+        [[ $bad_option == y ]] && echo "invalid argument '--'?  Type -h for help" >&2 && $___exit 1
+        break
+    else
+        params="$params ${argument}"
+    fi
+
+done
+
+[[ -n "$get_argument" ]] && echo "option '-$option' requires an argument"  >&2 && $___exit 1
+$___exit 0
+#echo params $params
+
diff --git a/scripts/service-openmano.sh b/scripts/service-openmano.sh
index 08e929e..1a48d4a 100755
--- a/scripts/service-openmano.sh
+++ b/scripts/service-openmano.sh
@@ -22,6 +22,9 @@
 ##
 
 
+#launch openmano inside a screen.
+#or call service if it is installed on systemd
+
 
 DIRNAME=$(readlink -f ${BASH_SOURCE[0]})
 DIRNAME=$(dirname $DIRNAME )
@@ -29,9 +32,13 @@
 
 function usage(){
     echo -e "Usage: $0 [openmano/mano] start|stop|restart|status"
-    echo -e "  Launch|Removes|Restart|Getstatus openmano on a screen"
+    echo -e "  Launch|Removes|Restart|Getstatus openmano on a screen/service"
+    echo -e "    -n --screen-name NAME : name of screen to launch openmano (default mano or service)"
+    echo -e "    -h --help: shows this help"
+    echo -e "    -- PARAMS use to separate PARAMS that will be send to the service. e.g. -pPORT -PADMINPORT --dbname=DDBB"
 }
 
+
 function kill_pid(){
     #send TERM signal and wait 5 seconds and send KILL signal ir still running
     #PARAMS: $1: PID of process to terminate
@@ -44,52 +51,93 @@
         [ $WAIT -eq 0 ] && echo -n "sending SIGKILL...  " &&  kill -9 $1  #kill when count reach 0
     done
     echo "done"
-   
 }
 
+#process options
+source ${DIRNAME}/get-options.sh "screen-name:n= help:h --" $* || exit 1
+
+#help
+[ -n "$option_help" ] && usage && exit 0
+
+
 #obtain parameters
 om_list=""
 #om_action="start"  #uncoment to get a default action
-for param in $*
+action_list=""
+om_params="$option__"
+
+for param in $params
 do
     [ "$param" == "start" -o "$param" == "stop"  -o "$param" == "restart" -o "$param" == "status" ] && om_action=$param  && continue
     [ "$param" == "openmano" -o "$param" == "mano" ]   && om_list="$om_list mano"             && continue
-    [ "$param" == "-h" -o "$param" == "--help" ] && usage && exit 0
-    
-    #if none of above, reach this line because a param is incorrect
-    echo "Unknown param '$param' type $0 --help" >&2
-    exit -1
+    #short options
+    echo "invalid argument '$param'?  Type -h for help" >&2 && exit 1
 done
 
+[[ -n $option_screen_name ]] && option_screen_name=${option_screen_name#*.} #allow the format 'pid.name' and keep only name
 #check action is provided
 [ -z "$om_action" ] && usage >&2 && exit -1
 
 #if no componenets supplied assume all
 [ -z "$om_list" ] && om_list="mano"
  
+function find_process_id(){ #PARAMS:  command screen-name
+    for process_id in `ps -o pid,cmd -U $USER -u $USER | grep -v grep | grep "${1}" | awk '{print $1}'`
+    do
+        scname=$(ps wwep $process_id | grep -o 'STY=\S*')
+        scname=${scname#STY=}
+        [[ -n "$2" ]] && [[ "${scname#*.}" != "$2" ]] && continue
+        echo -n "${process_id} "
+    done
+    echo
+}
+
 for om_component in $om_list
 do
-    [ "${om_component}" == "mano" ] && om_cmd="openmanod.py"   && om_name="openmano  " && om_dir=$(readlink -f ${DIR_OM})
+    screen_name="${om_component}"
+    [[ -n "$option_screen_name" ]] && screen_name=$option_screen_name
+    [ "${om_component}" == "mano" ] && om_cmd="./openmanod.py"   && om_name="openmano  " && om_dir=$(readlink -f ${DIR_OM})
     #obtain PID of program
-    component_id=`ps -o pid,cmd -U $USER -u $USER | grep -v grep | grep ${om_cmd} | awk '{print $1}'`
+    component_id=`find_process_id "${om_cmd}" $option_screen_name`
+    processes=$(echo $component_id | wc -w)
 
     #status
     if [ "$om_action" == "status" ]
     then
-        [ -n "$component_id" ] && echo "    $om_name running, pid $component_id"
-        [ -z "$component_id" ] && echo "    $om_name stopped"
+        running=""
+        for process_id in $component_id
+        do
+            scname=$(ps wwep $process_id | grep -o 'STY=\S*')
+            scname=${scname#STY=}
+            [[ -n "$option_screen_name" ]] && [[ "${scname#*.}" != "$option_screen_name" ]] && continue
+            printf "%-15s" "pid: ${process_id},"
+            [[ -n "$scname" ]] && printf "%-25s" "screen: ${scname},"
+            echo cmd: $(ps -o cmd p $process_id | tail -n1 )
+            running=y
+        done
+        #if installed as a service and it is not provided a screen name call service
+        [[ -f /etc/systemd/system/openmano.service ]] && [[ -z $option_screen_name ]] && running=y #&& service openmano status
+        if [ -z "$running" ]
+        then
+            echo -n "    $om_name not running" && [[ -n "$option_screen_name" ]] && echo " on screen '$option_screen_name'" || echo
+        fi
     fi
 
+    #if installed as a service and it is not provided a screen name call service
+    [[ -f /etc/systemd/system/openmano.service ]] && [[ -z $option_screen_name ]] && service openmano $om_action && ( [[ $om_action == status ]] || sleep 5 ) && exit $?
+
+
     #stop
     if [ "$om_action" == "stop" -o "$om_action" == "restart" ]
     then
         #terminates program
-        [ -n "$component_id" ] && echo -n "    stopping $om_name ... " && kill_pid $component_id 
+        [ $processes -gt 1 ] && echo "$processes processes are running, specify with --screen-name" && continue
+        [ $processes -eq 1 ] && echo -n "    stopping $om_name ... " && kill_pid $component_id
         component_id=""
         #terminates screen
-        if screen -wipe | grep -Fq .$om_component
+        if screen -wipe | grep -q -e  "\.${screen_name}\b" 
         then
-            screen -S $om_component -p 0 -X stuff "exit\n"
+            screen -S $screen_name -p 0 -X stuff "exit\n" || echo
             sleep 1
         fi
     fi
@@ -99,21 +147,21 @@
     then
         #calculates log file name
         logfile=""
-        mkdir -p $DIR_OM/logs && logfile=$DIR_OM/logs/open${om_component}.log || echo "can not create logs directory  $DIR_OM/logs"
+        mkdir -p $DIR_OM/logs && logfile=$DIR_OM/logs/open${screen_name}.log || echo "can not create logs directory  $DIR_OM/logs"
         #check already running
         [ -n "$component_id" ] && echo "    $om_name is already running. Skipping" && continue
         #create screen if not created
         echo -n "    starting $om_name ... "
-        if ! screen -wipe | grep -Fq .${om_component}
+        if ! screen -wipe | grep -q -e "\.${screen_name}\b"
         then
             pushd ${om_dir} > /dev/null
-            screen -dmS ${om_component}  bash
+            screen -dmS ${screen_name}  bash
             sleep 1
             popd > /dev/null
         else
-            echo -n " using existing screen '${om_component}' ... "
-            screen -S ${om_component} -p 0 -X log off
-            screen -S ${om_component} -p 0 -X stuff "cd ${om_dir}\n"
+            echo -n " using existing screen '${screen_name}' ... "
+            screen -S ${screen_name} -p 0 -X log off
+            screen -S ${screen_name} -p 0 -X stuff "cd ${om_dir}\n"
             sleep 1
         fi
         #move old log file index one number up and log again in index 0
@@ -124,11 +172,11 @@
                 [[ -f ${logfile}.${index} ]] && mv ${logfile}.${index} ${logfile}.$((index+1))
             done
             [[ -f ${logfile} ]] && mv ${logfile} ${logfile}.1
-            screen -S ${om_component} -p 0 -X logfile ${logfile}
-            screen -S ${om_component} -p 0 -X log on
+            screen -S ${screen_name} -p 0 -X logfile ${logfile}
+            screen -S ${screen_name} -p 0 -X log on
         fi
         #launch command to screen
-        screen -S ${om_component} -p 0 -X stuff "./${om_cmd}\n"
+        screen -S ${screen_name} -p 0 -X stuff "${om_cmd}${om_params}\n"
         #check if is running
         [[ -n $logfile ]] && timeout=120 #2 minute
         [[ -z $logfile ]] && timeout=20
@@ -139,7 +187,7 @@
            #if !  ps -f -U $USER -u $USER | grep -v grep | grep -q ${om_cmd}
            log_lines=0
            [[ -n $logfile ]] && log_lines=`head ${logfile} | wc -l`
-           component_id=`ps -o pid,cmd -U $USER -u $USER | grep -v grep | grep ${om_cmd} | awk '{print $1}'`
+           component_id=`find_process_id "${om_cmd}${om_params}" $screen_name`
            if [[ -z $component_id ]]
            then #process not started or finished
                [[ $log_lines -ge 2 ]] &&  echo -n "ERROR, it has exited." && break
@@ -153,7 +201,7 @@
         then 
            echo -n "timeout!"
         else
-           echo -n "running on 'screen -x ${om_component}'."
+           echo -n "running on 'screen -x ${screen_name}'."
         fi
         [[ -n $logfile ]] && echo "  Logging at '${logfile}'" || echo
     fi